Diagnostic Kit
Discussion
I bought the Torque app and a Bluetooth OBD2 plug for my 'Ro a little while back. It has the ability to scan for codes however it's never found any.... Guess that's a good thing!?
Also, what part of Sussex are you from? Never seen another red 'Ro floating around these parts, apart from one last week down my road in Copthorne!
Also, what part of Sussex are you from? Never seen another red 'Ro floating around these parts, apart from one last week down my road in Copthorne!
Edited by VXRocky on Monday 3rd March 18:21
Another Torque Pro user here.
Somewhere in the options, there is the ability to add in custom PIDs, and also to import an extra list of GM PIDs.
I've done this and haven't found anything, but have EFILive for fault code stuff anyway, so Torque is just fun for the gauges. It worked clearing some codes on a friends 320d at least
Somewhere in the options, there is the ability to add in custom PIDs, and also to import an extra list of GM PIDs.
I've done this and haven't found anything, but have EFILive for fault code stuff anyway, so Torque is just fun for the gauges. It worked clearing some codes on a friends 320d at least
Ok, so I got this Fault code reader and the torque app for android, all seems to work ok (connects/pairs via bluetooth) and says connected to ECU.
Now go easy with me cos Im new to this DIY fault stuff but if I get engine warning lights while driving I would expect there to be some kind of recorded fault?
When I "show logged faults" it comes back with "no faults"
So first question is, if I get "check engine" warning light while driving is it possible for that to have recorded no fault or does this mean theres a problem with the kit?
I hooked it up to the wifes car and it pulled a fault code from hers so it appears to "work"
Any advice what to do next would be appreciated.
Now go easy with me cos Im new to this DIY fault stuff but if I get engine warning lights while driving I would expect there to be some kind of recorded fault?
When I "show logged faults" it comes back with "no faults"
So first question is, if I get "check engine" warning light while driving is it possible for that to have recorded no fault or does this mean theres a problem with the kit?
I hooked it up to the wifes car and it pulled a fault code from hers so it appears to "work"
Any advice what to do next would be appreciated.
FinallyVXRed said:
Ok, so I got this Fault code reader and the torque app for android, all seems to work ok (connects/pairs via bluetooth) and says connected to ECU.
Now go easy with me cos Im new to this DIY fault stuff but if I get engine warning lights while driving I would expect there to be some kind of recorded fault?
When I "show logged faults" it comes back with "no faults"
So first question is, if I get "check engine" warning light while driving is it possible for that to have recorded no fault or does this mean theres a problem with the kit?
I hooked it up to the wifes car and it pulled a fault code from hers so it appears to "work"
Any advice what to do next would be appreciated.
I too would like to know the answers to above.Now go easy with me cos Im new to this DIY fault stuff but if I get engine warning lights while driving I would expect there to be some kind of recorded fault?
When I "show logged faults" it comes back with "no faults"
So first question is, if I get "check engine" warning light while driving is it possible for that to have recorded no fault or does this mean theres a problem with the kit?
I hooked it up to the wifes car and it pulled a fault code from hers so it appears to "work"
Any advice what to do next would be appreciated.
Ade

Some of the fault codes that trigger the engine warning light aren't exposed over the OBDII port as a standard fault type, so the generic code readers may not have those programmed in.
In torque, start it up, and tap the 'menu' type button on your phone and then select Settings.
In there, scroll down to Manage extra PIDs / Sensors and tap on that.
In there, again, press 'Menu' and tap 'Add predefined set'.
Tap 'Pontiac / GM / Opel / Vauxhall'
And voila, some extra things you can presumably measure. Whether this makes any difference to what fault codes it can read however, I don't know I'm afraid
If anyone has EFI Live nearby they could read the codes for you
In torque, start it up, and tap the 'menu' type button on your phone and then select Settings.
In there, scroll down to Manage extra PIDs / Sensors and tap on that.
In there, again, press 'Menu' and tap 'Add predefined set'.
Tap 'Pontiac / GM / Opel / Vauxhall'
And voila, some extra things you can presumably measure. Whether this makes any difference to what fault codes it can read however, I don't know I'm afraid

If anyone has EFI Live nearby they could read the codes for you
SturdyHSV said:
Some of the fault codes that trigger the engine warning light aren't exposed over the OBDII port as a standard fault type, so the generic code readers may not have those programmed in.
In torque, start it up, and tap the 'menu' type button on your phone and then select Settings.
In there, scroll down to Manage extra PIDs / Sensors and tap on that.
In there, again, press 'Menu' and tap 'Add predefined set'.
Tap 'Pontiac / GM / Opel / Vauxhall'
And voila, some extra things you can presumably measure. Whether this makes any difference to what fault codes it can read however, I don't know I'm afraid
Thanks for info James.
Ade
If anyone has EFI Live nearby they could read the codes for you
In torque, start it up, and tap the 'menu' type button on your phone and then select Settings.
In there, scroll down to Manage extra PIDs / Sensors and tap on that.
In there, again, press 'Menu' and tap 'Add predefined set'.
Tap 'Pontiac / GM / Opel / Vauxhall'
And voila, some extra things you can presumably measure. Whether this makes any difference to what fault codes it can read however, I don't know I'm afraid

Thanks for info James.
Ade

If anyone has EFI Live nearby they could read the codes for you
Just had a look at the extra stuff when I load those additional PIDs and I see theres misfire sensor codes for cylinders 1-6 but nothing for cyl 7 or 8. I assume thats because this isnt PID for V8 engines?
I looked at the edit for these PID's and see that the other properties are identical for all cylinders and just the actual PID is different with the last number being equal to the cyl number ie:
Pid 221201 Misfire Cyl.1 History
Pid 221202 Misfire Cyl.2 History
.....
Pid 221206 Misfire Cyl.6 History
I also see where I can add custom PIDs so would it just be a case of adding the exact same properties but incrementing the last number for cyl 7 & 8?
i.e:
Add Pid 221207 & 221208 ( and duplicating the properties that are the same for the other cylinders?)
I looked at the edit for these PID's and see that the other properties are identical for all cylinders and just the actual PID is different with the last number being equal to the cyl number ie:
Pid 221201 Misfire Cyl.1 History
Pid 221202 Misfire Cyl.2 History
.....
Pid 221206 Misfire Cyl.6 History
I also see where I can add custom PIDs so would it just be a case of adding the exact same properties but incrementing the last number for cyl 7 & 8?
i.e:
Add Pid 221207 & 221208 ( and duplicating the properties that are the same for the other cylinders?)
Edited by FinallyVXRed on Tuesday 18th March 12:54
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




