audi a4 b8 heated mirror element replace?
Discussion
Not done a b8 but the elements have always been built into the mirror lens, they just clip on with two wires attached to the back, tilt the mirror fully up and then use something like a wooden spatula to pry the mirror outwards gently from underneath, its just held on by a spring clip and will pop outwards.
As above really, pull from the centre of the glass (not the edge) to avoid shattering it.
When connecting or disconnecting the two spades on the back of the glass put it face down on a flat surface and hold it down around the male connectors on the back. The connectors are stiff and I've seen someone crack a glass by 'wiggling' them.
When connecting or disconnecting the two spades on the back of the glass put it face down on a flat surface and hold it down around the male connectors on the back. The connectors are stiff and I've seen someone crack a glass by 'wiggling' them.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


