Alpine navigation system installation
Alpine navigation system installation
Author
Discussion

miconone

Original Poster:

33 posts

169 months

Friday 7th March 2014
quotequote all
My first post, but I've been lurking here since I bought my red 2009 VXR8 in August last year.

I'm looking for some help! I've sourced the Alpine Installation Kit PFK8-COMMVES1. You can see it here

http://www.alpine.com.au/showItem.php?item_id=341

I've got an Alpine dealer here fitting this and a W928R navigation system, but we've hit a problem. The LCD control panel does not operate any of the ventilation controls. For example the fan speed can be increased on the panel, but the fan speed doesn’t actually increase. The same applies to the temperature controls. The control on the panel for the hazard lights does work.

The installer knows (informally) from Alpine UK that there've been 'a few' instances of this problem, but it's an Alpine Australia product and they direct us to them. We are pursuing that avenue.

I wondered if anyone on here has fitted this kit and encountered the same problem and found a solution?

Thanks in advance, Mike

FoxdieUK

441 posts

171 months

Friday 7th March 2014
quotequote all
Hi Mike, I responded to your question over on VXRO.

miconone

Original Poster:

33 posts

169 months

Friday 7th March 2014
quotequote all
Acknowledged over there, thank you!

miconone

Original Poster:

33 posts

169 months

Monday 10th March 2014
quotequote all
Problem resolved, the HVAC panel needed to be calibrated.

StefanVXR8

3,620 posts

229 months

Tuesday 11th March 2014
quotequote all
miconone said:
Problem resolved, the HVAC panel needed to be calibrated.
Any more info on how/why etc? I've been looking at this Alpine solution for a while.

Stef

miconone

Original Poster:

33 posts

169 months

Tuesday 11th March 2014
quotequote all
"Any more info on how/why etc? I've been looking at this Alpine solution for a while."

The installation instructions do say that the screen should be calibrated and there is a function to do this in the settings. I think the installer initially assumed that as the panel was illuminated, the calibration wasn't required.

Hope this clear.

Mike

StefanVXR8

3,620 posts

229 months

Wednesday 12th March 2014
quotequote all
miconone said:
"Any more info on how/why etc? I've been looking at this Alpine solution for a while."

The installation instructions do say that the screen should be calibrated and there is a function to do this in the settings. I think the installer initially assumed that as the panel was illuminated, the calibration wasn't required.

Hope this clear.

Mike
OK thanks, wasn't sure if it meant a session on the dealer diagnostics setup machine.

Stef