Monaro radio removal
Discussion
I did this at the weekend, had to go to halfrauds for special double din tool which enables you to go into all 4 holes at once, then I just wiggled them about at it came out, then forgot about steering wheel controls so put it straight back again! Then also realised I never have it on anyway lol, if your local to Fareham you can borrow them
KMud said:
I've got £2 ebay special tools, emphasis seems to be on the special :|
Thanks for the offer, but in Bristol.
If I had a decent camera, I'd take some pictures of the side of the radio so you could see how it's held in.Thanks for the offer, but in Bristol.
Wild jabbing and wiggling combined with trying to gain some purchase through the use of pulling on the tools at funny angles eventually broke it loose for me.
It is a mission though, and took 2 of us about 10 minutes to wrestle out.
If you want pics I can try, but lacking a decent camera currently...
SturdyHSV said:
If I had a decent camera, I'd take some pictures of the side of the radio so you could see how it's held in.
Wild jabbing and wiggling combined with trying to gain some purchase through the use of pulling on the tools at funny angles eventually broke it loose for me.
It is a mission though, and took 2 of us about 10 minutes to wrestle out.
If you want pics I can try, but lacking a decent camera currently...
This, it's not an easy task. Wild jabbing and wiggling combined with trying to gain some purchase through the use of pulling on the tools at funny angles eventually broke it loose for me.
It is a mission though, and took 2 of us about 10 minutes to wrestle out.
If you want pics I can try, but lacking a decent camera currently...
Dear KM,
I found it a bugger as well.
Spent half an hour with various screwdrivers, drills and other long round things that fitted a wigglin' and a jigglin' and a swearin'. Nowt came out.
Went inside, had a cuppa and ordered the correct tool online.
I thought I'd have one more try and... ...got it 1st go. The proper tool is still in its sealed bag!
Are you pressing in towards the centre of the unit or out towards its edges?
I can't remember which way is right but only one works,
best of luck,
Jet
I found it a bugger as well.
Spent half an hour with various screwdrivers, drills and other long round things that fitted a wigglin' and a jigglin' and a swearin'. Nowt came out.
Went inside, had a cuppa and ordered the correct tool online.
I thought I'd have one more try and... ...got it 1st go. The proper tool is still in its sealed bag!
Are you pressing in towards the centre of the unit or out towards its edges?
I can't remember which way is right but only one works,
best of luck,
Jet
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff










