Help me settle a discussion RE number plate spacing?
Discussion
Enjoying a topical discussion with a few buddies, all relative petrolheads. I mentioned that I could potentially fit my 5-digit numberplate in one of those American numberplate surrounds as the only thing that matters is the spacing around the characters themselves. Technically I could also use a line break in a 5-digit plate to read, as an example:
A1
ABC
with a small rectangular plate to suit.
I can't actually find any material specifying the -size- of numberplate, all I have is DVLA doc INF104 that states the size, typeface, distance between groups etc. To me, theoretically if I had the numberplate "2 B" then there's nothing stopping me from having a tiny little horizontal plate, or even a tall vertical plate just around the characters. The plate doesn't have to be the standard seven-character length. My friends aren't arguing against it, but are a little sceptical as to whether a shortened 'plate would actually pass a Plod spot check.
I apologise if I'm rambling a bit, hope my question makes sense.
A1
ABC
with a small rectangular plate to suit.
I can't actually find any material specifying the -size- of numberplate, all I have is DVLA doc INF104 that states the size, typeface, distance between groups etc. To me, theoretically if I had the numberplate "2 B" then there's nothing stopping me from having a tiny little horizontal plate, or even a tall vertical plate just around the characters. The plate doesn't have to be the standard seven-character length. My friends aren't arguing against it, but are a little sceptical as to whether a shortened 'plate would actually pass a Plod spot check.
I apologise if I'm rambling a bit, hope my question makes sense.
Coincidentally the 75/ZT was brought into the discussion (sort-of) as it has that fat rear plate - the DB9 has a big one as well, which was what was brought up. The debate started because you're never going to get stopped for more plate than is necessary (i.e. 2 B on a standard size plate), hence the Rover/Aston would be fine. Similarly a plate like the old Freelander (IIRC) where it was split into two lines was fine, but it was just if you wanted a smaller plate.
The example raised was to go to Halfords and ask them to make a plate that sat snugly around a short registration. While we couldn't decide on the legality, we all agreed that it would be nigh on impossible to make Halfords/other automotive stores actually sell you a trimmed plate.
The example raised was to go to Halfords and ask them to make a plate that sat snugly around a short registration. While we couldn't decide on the legality, we all agreed that it would be nigh on impossible to make Halfords/other automotive stores actually sell you a trimmed plate.
sebhaque said:
I can't actually find any material specifying the -size- of numberplate, all I have is DVLA doc INF104 that states the size, typeface, distance between groups etc.
You can't find it because there is nothing which specifically governs the size of the backing plate itself. The regulations control the following:- Character size
- Character spacing
- Character layout
- Spacing between groups of characters
- Border dimensions
The INF104 document is not the full monty. You need to look at the legislation - http://www.legislation.gov.uk/uksi/2001/561/conten...
There is a specific exemption for (grey) imports (mostly American and Jap cars) on which is not physically possible to mount the normal size plate. It allows for 'motorcycle' size characters, spacing, and a reduced border width - http://www.legislation.gov.uk/uksi/2002/2687/conte...
There is a further amendment which allows country flags instead of the EU stars symbol. However if you take the car outside the UK/NI you must still display a (black on white) GB plate - http://www.legislation.gov.uk/uksi/2009/811/conten...
sebhaque said:
To me, theoretically if I had the numberplate "2 B" then there's nothing stopping me from having a tiny little horizontal plate, or even a tall vertical plate just around the characters. The plate doesn't have to be the standard seven-character length. My friends aren't arguing against it, but are a little sceptical as to whether a shortened 'plate would actually pass a Plod spot check.
It's not theory, but fact. Provided all the aforementioned regs are complied with, your proposed tiny horiziontal "2 B" plate will be fine. I have a Jap import. The OEM plate holder size means that I can take advantage of the reduced character set. My VRM is 5 characters long on a custom (shortened) backing plate and is 100% legal in every respect.You may find some Plod who aren't fully up to speed will query a (legal) shortened plate. I encountered one who also didn't know about the 2002 amendment. Dead set on stiffing me with a FPN. He wouldn't have it that he was wrong (I was scrupulously polite and told him he was mistaken) so he began giving it large.
However, I keep a copy of the regs in the glove box for this specific reason. I told him if he wrote me up I would contest the ticket and was certain to win. He would be wasting his and the court's time. I then fished out the paperwork and suggested that it might help if he had a look at it before going any further. It stopped him dead in his tracks and I was amused to watch his jaw clenching. He was clearly trying to work out how he could reclaim the moral high ground. He failed. He thrust the paperwork back in my hand, told me curtly I was free to go and flounced off back to his car.
sebhaque said:
I apologise if I'm rambling a bit, hope my question makes sense.
No worries. It does.Red Devil said:
sebhaque said:
I can't actually find any material specifying the -size- of numberplate, all I have is DVLA doc INF104 that states the size, typeface, distance between groups etc.
You can't find it because there is nothing which specifically governs the size of the backing plate itself. The regulations control the following:- Character size
- Character spacing
- Character layout
- Spacing between groups of characters
- Border dimensions
The INF104 document is not the full monty. You need to look at the legislation - http://www.legislation.gov.uk/uksi/2001/561/conten...
There is a specific exemption for (grey) imports (mostly American and Jap cars) on which is not physically possible to mount the normal size plate. It allows for 'motorcycle' size characters, spacing, and a reduced border width - http://www.legislation.gov.uk/uksi/2002/2687/conte...
There is a further amendment which allows country flags instead of the EU stars symbol. However if you take the car outside the UK/NI you must still display a (black on white) GB plate - http://www.legislation.gov.uk/uksi/2009/811/conten...
sebhaque said:
To me, theoretically if I had the numberplate "2 B" then there's nothing stopping me from having a tiny little horizontal plate, or even a tall vertical plate just around the characters. The plate doesn't have to be the standard seven-character length. My friends aren't arguing against it, but are a little sceptical as to whether a shortened 'plate would actually pass a Plod spot check.
It's not theory, but fact. Provided all the aforementioned regs are complied with, your proposed tiny horiziontal "2 B" plate will be fine. I have a Jap import. The OEM plate holder size means that I can take advantage of the reduced character set. My VRM is 5 characters long on a custom (shortened) backing plate and is 100% legal in every respect.You may find some Plod who aren't fully up to speed will query a (legal) shortened plate. I encountered one who also didn't know about the 2002 amendment. Dead set on stiffing me with a FPN. He wouldn't have it that he was wrong (I was scrupulously polite and told him he was mistaken) so he began giving it large.
However, I keep a copy of the regs in the glove box for this specific reason. I told him if he wrote me up I would contest the ticket and was certain to win. He would be wasting his and the court's time. I then fished out the paperwork and suggested that it might help if he had a look at it before going any further. It stopped him dead in his tracks and I was amused to watch his jaw clenching. He was clearly trying to work out how he could reclaim the moral high ground. He failed. He thrust the paperwork back in my hand, told me curtly I was free to go and flounced off back to his car.
sebhaque said:
I apologise if I'm rambling a bit, hope my question makes sense.
No worries. It does.I was given a rectification notice and a producer which also asked for me to produce the MOT certificate on a 2year old car!

Red Devil said:
Very informative post
Thanks for the detailed explanation! I think that's al the info I need + more. Virtual pint on me 
Saleen836 said:
US import
Have you mentioned this on PH before? I vaguely remember reading something like this a year or so ago. Does make me chuckle though, I suppose it's one of those facets of vehicle registrations that rarely gets any attention.Saleen836 said:
I also keep a copy of the regs in my glovebox for my US import, I was pulled by a female officer for 'rear number plate not regulation' she even radio'd to the traffic sergeant as she didn't believe me when I told her it was legal, his reply which I heard was "if it is on english plates they must be standard size!"
I was given a rectification notice and a producer which also asked for me to produce the MOT certificate on a 2year old car!
The important bit of The Road Vehicles (Display of Registration Marks) (Amendment) Regulations 2002 is Section 5(2) which says:I was given a rectification notice and a producer which also asked for me to produce the MOT certificate on a 2year old car!

“Size and spacing of characters: special cases
14A. (1) This regulation applies in relation to any vehicle imported into the United Kingdom which—
(a) does not have European Community Whole Vehicle Type Approval; and
(b) is so constructed that the area available for the fixing of the registration plate precludes the display on the plate of a registration mark in conformity with the requirements of regulation 14.
Note the and above. This means that BOTH requirements must be met. American and JDM grey imports will easily satisfy sub-paragraph a). It is b) which is the crucial bit. It is physically impossible to fit a 7 character 'English' style plate to my car. The front OEM plate holder isn't big enough nor is the recess in the rear bumper.
IF your car satisfied the criteria and there was nothing else wrong with the plate (e.g. dodgy font/misplaced characters/fudged or wrongly coloured fixing screw caps etc. etc.) then the female officer and the traffic sergeant were wrong. No ifs, no buts. The 2002 amendment is not widely known (other than by owners of American and Jap imports!) and this lack of knowledge appears to be shared by (some) Plod.
The producer I could live with but not an incorrectly issued VDRS. I would have been fuming at the unwarranted cost of new plates and the waste of my time. My response would be to hot foot it round to the cop shop with my documents asking (politely but assertively!) for a meeting with the duty inspector in order to have the Notice cancelled.
"Inspector, the traffic sergeant that the female officer spoke to claimed that there is a 'standard size' for an 'English' (I think he meant UK) number plate. I beg to differ. Where in the legislation is the relevant paragraph which mandates a specific size for the (backing) plate? I would be grateful if you can show it to me."
I might even offer to donate £50 to a charity of his choice if he was able to find it.
Red Devil said:
Note the and above. This means that BOTH requirements must be met.
Correct.The other number plate oddity is that the plate must be "vertical" but can otherwise be anywhere you like on the front/back of the car. Hence all those awful looking Alfas with the plate offset to one side.
Although the backing plate can be any size you like,
"The surface of a registration plate must not comprise or incorporate any design, pattern or texture, or be treated in any way which gives to any part of the plate the appearance of a design, pattern or texture.”
So you can't have a plate shaped like a dog/cat/pony with your registration on it. This does not completely prohibit shaped plates - as seen on the back of some Rovers.
"The surface of a registration plate must not comprise or incorporate any design, pattern or texture, or be treated in any way which gives to any part of the plate the appearance of a design, pattern or texture.”
So you can't have a plate shaped like a dog/cat/pony with your registration on it. This does not completely prohibit shaped plates - as seen on the back of some Rovers.
sebhaque said:
Red Devil said:
Very informative post
Thanks for the detailed explanation! I think that's al the info I need + more. Virtual pint on me 
Saleen836 said:
US import
Have you mentioned this on PH before? I vaguely remember reading something like this a year or so ago. Does make me chuckle though, I suppose it's one of those facets of vehicle registrations that rarely gets any attention.Gassing Station | Speed, Plod & the Law | Top of Page | What's New | My Stuff


