Difference between LS3 short and long block
Discussion
Hi,
As per title, what is the difference between LS3 short block that used to sit in my late car and long block being sold here:
http://www.ebay.com/itm/2010-2013-Chevrolet-Corvet...
Will it fit? And how different is it internally?
Also, do same rules apply when buying a used engine from the US? I mean what is duty and VAT established upon?
As per title, what is the difference between LS3 short block that used to sit in my late car and long block being sold here:
http://www.ebay.com/itm/2010-2013-Chevrolet-Corvet...
Will it fit? And how different is it internally?
Also, do same rules apply when buying a used engine from the US? I mean what is duty and VAT established upon?
ARAF said:
I could work it all out for you, but I don't want to encourage you.
For all anyone knows, that engine could be as bad as yours.
Hi Ian,For all anyone knows, that engine could be as bad as yours.
I realize that, but then what are the chances of it being more ruined than mine? I mean 20k miles?
The alternative is a complete short block with pistons and the whole rotating assembly already in. For just under $4k, then one replacement head, cam of my choice and springs and we are back on the road right?
Also, is there a way of buying something new, but classed as used? Would vat and duty still apply?
djwilk said:
ARAF said:
I could work it all out for you, but I don't want to encourage you.
For all anyone knows, that engine could be as bad as yours.
Hi Ian,For all anyone knows, that engine could be as bad as yours.
I realize that, but then what are the chances of it being more ruined than mine? I mean 20k miles?
The alternative is a complete short block with pistons and the whole rotating assembly already in. For just under $4k, then one replacement head, cam of my choice and springs and we are back on the road right?
Also, is there a way of buying something new, but classed as used? Would vat and duty still apply?
As for the engine you found, it's in the States, but had apparently been taken from a car in Japan. You have no verification for the mileage, and why it was removed. Car could have been in a crash, and the bearings could have moved - or it could have been for a swim (in the tsunami they had in 2011 maybe?), you just have no way of knowing.
gsd2000 said:
If your going used. Speak to raving
Tried numerous times, but he never answers his phone. Tried emailing, but has never worked. And what I gathered from Ebay he has got an LS2 + g/box for just under £6k, which is neither ideal nor the right application for me car. And I don't need a gearbox... Yet...djwilk said:
Hi,
As per title, what is the difference between LS3 short block that used to sit in my late car and long block being sold here:
http://www.ebay.com/itm/2010-2013-Chevrolet-Corvet...
Will it fit? And how different is it internally?
Also, do same rules apply when buying a used engine from the US? I mean what is duty and VAT established upon?
That is a used bare engine they say comes from Japan ?As per title, what is the difference between LS3 short block that used to sit in my late car and long block being sold here:
http://www.ebay.com/itm/2010-2013-Chevrolet-Corvet...
Will it fit? And how different is it internally?
Also, do same rules apply when buying a used engine from the US? I mean what is duty and VAT established upon?
By the time it is here it will cost you £4k between shipping and taxes.
When you compare it to this, which naturally the UK price they are listing SHOULD include VAT ( although no doubt as with many dodgy sellers, they seem to quote to UK buyers without VAT, so judging from PWP's prices, Roadcraft may be dodgy and advertising without VAT )
Well....why would you even consider used ? Even at the higher cost after extortionate taxes have been added, it still isnt terrible.
Which from the picture is a far more complete engine than the egay link which would require more money spent to make it usable.
ie no intake, manifolds, DBW, water pump etc.
http://www.roadcraftuk.co.uk/index.php?route=produ...
stevieturbo said:
That is a used bare engine they say comes from Japan ?
By the time it is here it will cost you £4k between shipping and taxes.
When you compare it to this, which naturally the UK price they are listing SHOULD include VAT ( although no doubt as with many dodgy sellers, they seem to quote to UK buyers without VAT, so judging from PWP's prices, Roadcraft may be dodgy and advertising without VAT )
Well....why would you even consider used ? Even at the higher cost after extortionate taxes have been added, it still isnt terrible.
Which from the picture is a far more complete engine than the egay link which would require more money spent to make it usable.
ie no intake, manifolds, DBW, water pump etc.
http://www.roadcraftuk.co.uk/index.php?route=produ...
I was hoping it would work out less than £4k landed being a used part so no VAT. And I've got all the ancillaries.By the time it is here it will cost you £4k between shipping and taxes.
When you compare it to this, which naturally the UK price they are listing SHOULD include VAT ( although no doubt as with many dodgy sellers, they seem to quote to UK buyers without VAT, so judging from PWP's prices, Roadcraft may be dodgy and advertising without VAT )
Well....why would you even consider used ? Even at the higher cost after extortionate taxes have been added, it still isnt terrible.
Which from the picture is a far more complete engine than the egay link which would require more money spent to make it usable.
ie no intake, manifolds, DBW, water pump etc.
http://www.roadcraftuk.co.uk/index.php?route=produ...
But I take your point on lack of proof of mileage etc.
The used engine has never had vat paid, so you will have to pay it after import duty has been applied, which is usually 4% for car parts. Assuming $500 for shipping you are looking at around £3500 -£4000 landed. Is there any parts on your dead engine that you could sell to soften the blow?
Davep24 said:
The used engine has never had vat paid, so you will have to pay it after import duty has been applied, which is usually 4% for car parts. Assuming $500 for shipping you are looking at around £3500 -£4000 landed. Is there any parts on your dead engine that you could sell to soften the blow?
All that's shot is the crank, the block and the piston with the conrod. The alternative I am looking at is a OEM short block for around $1500 new. Then crank, new big ends, conrod and piston. The rest can be savoured.Davep24 said:
The used engine has never had vat paid, so you will have to pay it after import duty has been applied, which is usually 4% for car parts. Assuming $500 for shipping you are looking at around £3500 -£4000 landed. Is there any parts on your dead engine that you could sell to soften the blow?
All that's shot is the crank, the block and the piston with the conrod. The alternative I am looking at is a OEM short block for around $1500 new. Then crank, new big ends, conrod and piston. The rest can be reused. Behold81 said:
Surely you only need a block. Your crank should be fine. You want a new cam. Lifters and ancillaries can be moved. Then a new head rod and piston your done. If money is an issue or sore point might be the best bet.
That's exactly what I'm thinking. I am betting the crank is shot as the conrod blocked itself against the block and I am sure knocked the crank out of balance.As for one of the heads that has suffered, see the pic below. The damage there is a bent valve which I could replace, the valve seat is all in tact, the combustion chamber a little scratched but I imagine it can either be polished or have no impact on the quality of burn. See below anyway:

ARAF said:
That head can be cleaned up quite easily, and new guides put in that cylinder, just to be on the safe side.
From those dents and scratches, the head certainly isn't scrap.
Hi Ian,From those dents and scratches, the head certainly isn't scrap.
I thought about the new guides, but the cylinder liner has got a chip at the very bottom, so am not sure if that will not prevent me from doing it. On the other hand, it would be a new liner, so in theory it should not matter.
djwilk said:
ARAF said:
That head can be cleaned up quite easily, and new guides put in that cylinder, just to be on the safe side.
From those dents and scratches, the head certainly isn't scrap.
Hi Ian,From those dents and scratches, the head certainly isn't scrap.
I thought about the new guides, but the cylinder liner has got a chip at the very bottom, so am not sure if that will not prevent me from doing it. On the other hand, it would be a new liner, so in theory it should not matter.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



any idea as for duties and vat?