A8 PRNDS display doesn't change
A8 PRNDS display doesn't change
Author
Discussion

TedC

Original Poster:

5 posts

159 months

Wednesday 12th March 2014
quotequote all
i recently bought an 07 A8 3.0tdi. noticed today the PRNDS display on the dash had all the letters hilighted instead of just the one. when i put it into tip mode nothing changes up or down, it stays in auto and the PRNDS display all stays hilighted. after a while it went back to normal but then it happened again twice..

milu

2,514 posts

297 months

Wednesday 12th March 2014
quotequote all
Had this on my Touareg. If its the same problem,under the blind that moves with the gear selector is the pick-up for the various functions selected.Mine had moved but once put back everything worked again.
Im a bit vague because its a few years back!

Dr G

16,012 posts

273 months

Wednesday 12th March 2014
quotequote all
As milu says, really could be something as simple as a selector switch. I've never come across one fail with the tip box but that's one of the tricks a failed multitronic ECU does.

It isn't a common fault on an A8 so unless it is something apparent like a loose connector you may be better off investing in a proper diagnosis.

TedC

Original Poster:

5 posts

159 months

Wednesday 12th March 2014
quotequote all
cheers guys. i've a feeling(hope) its something not too serious

anonymous-user

85 months

Wednesday 12th March 2014
quotequote all
Had this on my D2 A8 many years ago.

All the lights lit up means the gearbox has gone into limp mode. Chances are you have a limited no of gears and a limited max speed.

If it is intermittent, it may just be a faulty switch somewhere.


Adrian E

3,369 posts

207 months

Wednesday 12th March 2014
quotequote all
As above, it's in limp mode so you probably only have 3rd and reverse to choose from!

If it relates to when you're shuttling between D and R making it come up it'll be the range select switch on the box, or a dirty connector on it. On the D2 '8s it's quite common but not heard of D3 suffering the same so not 100% sure if has the same mechanical switch on the box which is the cause of the issue