LSA crate engine (8k) vs TVS 2300 (6k) plus fitting
LSA crate engine (8k) vs TVS 2300 (6k) plus fitting
Author
Discussion

Gelf VXR

Original Poster:

713 posts

238 months

Thursday 13th March 2014
quotequote all
If I was to consider going FI, would the crate 6.2 LSA fit into a 05 Monaro 6.0 VXR? Under the hood clearance and mate to the gear box? Retaining the E40 PCM?

Is the SC able to support a larger cam also?


The crate comes with bottom end built for FI and light valve train, I could sell the LS2 to recoup some cost.

monkfish1

12,522 posts

255 months

Thursday 13th March 2014
quotequote all
Gelf VXR said:
If I was to consider going FI, would the crate 6.2 LSA fit into a 05 Monaro 6.0 VXR? Under the hood clearance and mate to the gear box? Retaining the E40 PCM?

Is the SC able to support a larger cam also?


The crate comes with bottom end built for FI and light valve train, I could sell the LS2 to recoup some cost.
Errr, no!

Blower to tall, different number of crank bolts, so adaptor required and it uses a 58 tooth reluctor so not compatible with ecu.

Last 2 are resolvable, 1st one not so much. Well not without some body mods.

Cam would wake it up as LSA cam barely has any lobes.



Gelf VXR

Original Poster:

713 posts

238 months

Thursday 13th March 2014
quotequote all
monkfish1 said:
Errr, no!

Blower to tall, different number of crank bolts, so adaptor required and it uses a 58 tooth reluctor so not compatible with ecu.

Last 2 are resolvable, 1st one not so much. Well not without some body mods.

Cam would wake it up as LSA cam barely has any lobes.
Thanks Roger

willisit

2,188 posts

262 months

Thursday 13th March 2014
quotequote all
I can see where you're going though - is there a sliding scale as to where you want to be and whether it's worth tinkering versus replacing the LS2 (Monaro)? I've always fancied either SC or TC but think TC would be better longer term. That said, the investment is probably better off in a new custom build rather than modification. I've been there.. it's expensive.

I'd love an LSA'd car.. the ZL1 is my choice!

Behold81

2,931 posts

200 months

Thursday 13th March 2014
quotequote all
Point one can be fixed by slamming the bonnet down hard. or cut a hole and make a plastic cover for the charger Transam Style!

anonymous-user

85 months

Thursday 13th March 2014
quotequote all
Mine has an LSA hybrid in it. LSA block & crank (24x), forged rods/pistons,TVS2300 supercharged instead of the 1900, GT9 cam, CNC ported LSA heads, LS9 clutch, VXR8 bell housing and a few bits of fabrication/cutting to make it fit. Works brilliantly but not cheap.