wiringloom

[tunepipe911]

Hey

looking for a new wiringloom for a 1979 3000s,while restoring and putting car back together,I think
the best thing is place a new one,only question is where to find one.
My electrical skills are to low to make one myself,are they much different to a 3000m?
The 3000m can be found,the 3000s is another thing,
Thanks for any reply,as the next step is on hold because off the electrical problem,

Rudy,

[madsvlund]

Hi Rudy, I have an old one, but not for much help :-)

[tunepipe911]

Mads,
Have a old one to,it could help if I send it over to have it made new,
But then have to be sure if it is the wright one,

Thanks!

[oldgeebee]

Hi Rudi, I might be able to help since I made a new loom for mine from scratch. I did make some "improvements" along the way and found it was easier to match everything up in-situ rather than measure up and make a loom on the bench and then fit.

If your old loom is complete and you've put all the electrical items back in the same places they were originally, then I'm sure there are companies that will make you an exact copy. If you've changed locations (like I did) or want to improve on some of the issues with the original wiring (like I did) then a custom loom is the only solution.

I'll email you with some thoughts.

GB

[prideaux]

oldgeebee said:

Hi Rudi, I might be able to help since I made a new loom for mine from scratch. I did make some "improvements" along the way and found it was easier to match everything up in-situ rather than measure up and make a loom on the bench and then fit.

If your old loom is complete and you've put all the electrical items back in the same places they were originally, then I'm sure there are companies that will make you an exact copy. If you've changed locations (like I did) or want to improve on some of the issues with the original wiring (like I did) then a custom loom is the only solution.

I'll email you with some thoughts.

GB

Sounds like a window frame/loom trade might be in the offering
a

[tunepipe911]

Graham

If you can make me one? That would help!!
Original or with modifications,I am happy to find one,
Just email me for details,

Thanks

Rudy,
As youn can see,doorframes are on the move again
,
,

Why are all them parts so different,must be the handbuild-factor,no?

[bluezeeland]

Touching, what a fellow 3000S owner can be of a motivation, isn't it Mr. Tunepipe...............

[tunepipe911]

A solution is on its way!;)

[bluezeeland]

Good ! (txs for the advise today, mate !)

[oldgeebee]

tunepipe911 said:

A solution is on its way!;)

GB

[bluezeeland]

it involves a 'electrical' trip to Belgium, Graham................(whilst your here........)

[oldgeebee]

bluezeeland said:

it involves a 'electrical' trip to Belgium, Graham................(whilst your here........)

but sounds like a plan

GB

[tunepipe911]

please first electrics then ,

[oldgeebee]

damn . . . so that's where I've been going wrong!

GB

[prideaux]

tunepipe911 said:

please first electrics then ,

Behave and get that car finished
A

[bluezeeland]

Have you set fire to a porker, Rudy ? (good man !)