Monaro interior mods - then/now
Discussion
Not quite the Gary H school of interior modding here, but I wasn't happy with my wideband install and have been tinkering. For such a small change I think it's really brightened up the inside of the CV8, which is otherwise a bit like Disaster Area's spaceship (Hitchhiker's
).

Differences between the 2 pics:

).
Differences between the 2 pics:
- Wideband gauge in VXR gauge pod, associated trim bits
- VXR gear knob
- new steering wheel to remove bobbly silver spoke

SturdyHSV said:
Made me want to take a picture of mine now!
I may nip out to it later on just to contribute, won't be able to get such a good photo though, very nice!
Also, there look to have been some significant exterior mods too, wall's moved and everything
New house, garage pending I may nip out to it later on just to contribute, won't be able to get such a good photo though, very nice!
Also, there look to have been some significant exterior mods too, wall's moved and everything


Yours definitely deserves a decent photo. Can do it at V8UK for you. Was thinking of yours when I had the airbag in my hand this morning...
KMud said:
SturdyHSV said:
Made me want to take a picture of mine now!
I may nip out to it later on just to contribute, won't be able to get such a good photo though, very nice!
Also, there look to have been some significant exterior mods too, wall's moved and everything
New house, garage pending I may nip out to it later on just to contribute, won't be able to get such a good photo though, very nice!
Also, there look to have been some significant exterior mods too, wall's moved and everything


Yours definitely deserves a decent photo. Can do it at V8UK for you. Was thinking of you when I had my hairybag in my hand this morning...

Mods look good

KMud said:
Tattooboy said:
Too much info !! 
Mods look good
I was grateful when it didn't explode 
Mods look good


EmmaJ said:
KMud said:
Tattooboy said:
Too much info !! 
Mods look good
I was grateful when it didn't explode 
Mods look good


https://www.youtube.com/watch?v=8XzgwmMqHtg

KMud said:
Not quite the Gary H school of interior modding here, but I wasn't happy with my wideband install and have been tinkering. For such a small change I think it's really brightened up the inside of the CV8, which is otherwise a bit like Disaster Area's spaceship (Hitchhiker's
).

Differences between the 2 pics:

Nicely done
).
Differences between the 2 pics:
- Wideband gauge in VXR gauge pod, associated trim bits
- VXR gear knob
- new steering wheel to remove bobbly silver spoke


gsd2000 said:
your interior mods are very similar to me 
Im looking into a twin pillar pod for AFR and a scangauge, then mount oil pressure and oil temp gauges in the centre pod
Got a pic of how it stands? Only really seen the outside of yours. I plan to make my own combined oil temp/pressure for the other gauge hole (A-pillar thick enough already!). 
Im looking into a twin pillar pod for AFR and a scangauge, then mount oil pressure and oil temp gauges in the centre pod
SturdyHSV said:
That would be awesome 
Here's my shot, in the rain just now
Plenty more to be done to the stereo slot, very much make do at the mo'

Seats still very much on my list 
Here's my shot, in the rain just now

Plenty more to be done to the stereo slot, very much make do at the mo'

KMud said:
gsd2000 said:
your interior mods are very similar to me 
Im looking into a twin pillar pod for AFR and a scangauge, then mount oil pressure and oil temp gauges in the centre pod
Got a pic of how it stands? Only really seen the outside of yours. I plan to make my own combined oil temp/pressure for the other gauge hole (A-pillar thick enough already!). 
Im looking into a twin pillar pod for AFR and a scangauge, then mount oil pressure and oil temp gauges in the centre pod
SturdyHSV said:
That would be awesome 
Here's my shot, in the rain just now
Plenty more to be done to the stereo slot, very much make do at the mo'

Seats still very much on my list 
Here's my shot, in the rain just now

Plenty more to be done to the stereo slot, very much make do at the mo'

TheLostProphet said:
Quick question for you SturdyHSV. Im going to make an attempt at changing the interior LED lights this weekend as I have a couple of days off. Was just wondering what ones I need to order for the instruments and the footwell ones as well.
Surface mount LEDs for the blue (original listing I got them from)http://www.ebay.co.uk/itm/50x-SMD-PLCC-2-3528-Ultr...
Naturally same type of LED, but in different colours

For the non surface mount stuff, used these:
http://www.ebay.co.uk/itm/QTY-20-BLUE-LEDs-3500mcd...
Footwell I'd say just get some of those reels of LEDs that are sticky backed, that's what I did, although the 'cool white' is in fact a bit 'chav white' (too blue tinged) so avoid those! I'm going to redo the various interior bulbs with LEDs at some point, must get round to finishing the job properly!
Unless you're very handy with a solder sucker and/or solder braid, you may struggle to get the dash turned around in a couple of days.
I think the whole process took me about 40hours (in total) spread over about 2 weeks, but then I'd not really used a soldering iron before so...
Start on the other simpler stuff (window switches, headlight switch, mode/set buttons etc.) first I'd say and see how you go. The A/C unit is very simple to do (just note the polarity of all of the LEDs) and will give you a feel for doing the surface mount stuff (it's actually quite easy, if fiddly)
I hope you have some fine tweezers.
I have LOADS of pictures, so let me know if you need anything clarifying, even trim removal etc.
In fact, here's all the pictures:
http://tinyurl.com/otvkv6f
Should at least mean none of it is a surprise!
Edited by SturdyHSV on Tuesday 25th March 09:44
KMud said:
I've done a fair bit of ad-hoc soldering (various locations and gear), and a decent, temperature-controlled soldering iron with a fine tip makes a massive difference. If I were undertaking that amount of work I'd spend £100 or so on a good one.
£100! Wowzers, I spent less than that on the whole job 
Fine tip I agree with, think I spent about £35 on the iron, ebay naturally, having the tiny tip really helped.
Oh you'll want a third hand too (
) for doing the headlight switch at least. That. Took. Hours. Which is why I then got a fine tipped soldering iron, the old P.O.S I was using made that job much harder.Thanks for all that mate. Just had a look at all the pics you sent they are going to be a great help.
Probably wont get it all done this weekend but if I can get some of the easier ones done and save the dash for another day I will be happy.
Im not bad with a soldering iron so confident I can do the job just going to take me a bit of time.
Whats the deal with the resistors? Do I need to add in new ones?
Probably wont get it all done this weekend but if I can get some of the easier ones done and save the dash for another day I will be happy.
Im not bad with a soldering iron so confident I can do the job just going to take me a bit of time.
Whats the deal with the resistors? Do I need to add in new ones?
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


