Engine is Out, how to tart up LS2 and S/C?
Engine is Out, how to tart up LS2 and S/C?
Author
Discussion

antnicuk

Original Poster:

351 posts

219 months

Thursday 20th March 2014
quotequote all
The LS2 is out of my poor Ro and the supercharger is off. I wanted to spruce it up a little before it goes off to be fitted into the M3. I have seen some very pretty superchargers and wondered what people have done with them. Its plain aluminium at the moment but isnt too 'furry'. Also, what have people done to the blocks, rocker covers etc?

pics would be good for some inspiration.

KMud

2,924 posts

187 months

Thursday 20th March 2014
quotequote all
There are some nice rocker covers around, are you going to relocate the coil packs off the covers?

stevieturbo

18,105 posts

278 months

Thursday 20th March 2014
quotequote all
Paint, powdercoat, polish, flock, nothing.

There are lots of options, some will be easier than others, cheaper than others, and more resilient than others.

Some will be high maintenance to look good ( ie bare metal polish ) others less so.

So all those things need to be considered.

MyM8V8

9,468 posts

226 months

Thursday 20th March 2014
quotequote all
antnicuk said:
The LS2 is out of my poor Ro and the supercharger is off. I wanted to spruce it up a little before it goes off to be fitted into the M3. I have seen some very pretty superchargers and wondered what people have done with them. Its plain aluminium at the moment but isnt too 'furry'. Also, what have people done to the blocks, rocker covers etc?

pics would be good for some inspiration.



???

(Yes Ian, its on its way in now)

S800VXR

5,877 posts

231 months

Friday 21st March 2014
quotequote all
I likey those valve covers (and everything else in the picture). Where did they pop up from Mr G?

neiljohnson

11,298 posts

238 months

Friday 21st March 2014
quotequote all
Alubrite will clean up any bits that have surface corrosion like the charger or any brackets & even the block

Will give a good finish to paint/ coat or even just leave bare

Be careful though it's nasty stuff!

KMud

2,924 posts

187 months

Friday 21st March 2014
quotequote all
MyM8V8 said:
What HT leads are you running Gareth?

SturdyHSV

10,443 posts

198 months

Friday 21st March 2014
quotequote all
KMud said:
What HT leads are you running Gareth?
They look like MSDs looking at the plug end, but I may well be wrong smile

KMud

2,924 posts

187 months

Friday 21st March 2014
quotequote all
I think so too, but is it the DIY kit or is there one that fits? Coil packs are in the same location as mine, and stick made mine custom.

MyM8V8

9,468 posts

226 months

Friday 21st March 2014
quotequote all
S800VXR said:
I likey those valve covers (and everything else in the picture). Where did they pop up from Mr G?
Katech carbon covers and coil kits with leads. Not cheap.

Pacemaker 1.7/8 headers. Should be back in the ute this weekend.

The leads come from Katech to suit but they are MSDs IIRC.

antnicuk

Original Poster:

351 posts

219 months

Friday 21st March 2014
quotequote all
ooohh nice, i like the carbon covers.....

VinceM

1,906 posts

169 months

Friday 21st March 2014
quotequote all
MyM8V8 said:
Katech carbon covers and coil kits with leads. Not cheap.

Pacemaker 1.7/8 headers. Should be back in the ute this weekend.

The leads come from Katech to suit but they are MSDs IIRC.
Those headers look awesome. I think I need these on my car soon.

ringram

14,702 posts

279 months

Friday 21st March 2014
quotequote all
Dont forget to get a startup clip mate!

Tattooboy

7,946 posts

209 months

Friday 21st March 2014
quotequote all
Great work Gareth, that looks cool

MyM8V8

9,468 posts

226 months

Saturday 22nd March 2014
quotequote all
ringram said:
Dont forget to get a startup clip mate!
Looking forward to it! Soon.

(actually, it has been run up on a dyno to check it's all ok - no power figures though and I didn't get to hear it cry)