Let the Monaro Mods begin............
Let the Monaro Mods begin............
Author
Discussion

mv6

Original Poster:

1,452 posts

271 months

Friday 21st March 2014
quotequote all
07 plate VXR.Had it nearly 5yrs! Only a Magnaflow cat-back so far. Plan is for AAS headers,de-cat and cutouts to start off with,followed by a sting red Duspeed over the radiator intake.Still to decide on a cam! Simon,Mikey,Richard? Great shopping list!

KMud

2,924 posts

187 months

Friday 21st March 2014
quotequote all
Forget the cutouts for now IMO, I have AAS headers and de-cats, and I think you'll find it a world apart from where you are currently!

mikeyb1987

2,358 posts

185 months

Friday 21st March 2014
quotequote all
mv6 said:
07 plate VXR.Had it nearly 5yrs! Only a Magnaflow cat-back so far. Plan is for AAS headers,de-cat and cutouts to start off with,followed by a sting red Duspeed over the radiator intake.Still to decide on a cam! Simon,Mikey,Richard? Great shopping list!
Nice! It'll be interesting to see what it sounds like with decats/cutouts.

As you know, I'm running a full AAS system. It's fantastic, the quality is second-to-none. There is very little droning, but with plenty of voice when you give it some throttle smile There is the odd occasion that I wish it was louder, so have been considering decats/cutouts myself.

As for cam, you probably want to look for something around 222/224 region with a 114ish LSA. If you keep lift below 0.600, Beehive springs would be a good upgrade. Ask Stuart about porting your heads too. Richard is definitely a better person to ask though! I emailed him re cam specs and he was a massive help.
Will you be getting AAS to do the work? They've just finished my cam/heads install, and I'm picking it up tomorrow biggrin

ringram

14,702 posts

279 months

Friday 21st March 2014
quotequote all
Yeah somewhere around there works. Depends on requirements, but thats what's considered a mild daily driver spec.
Smaller for something more mellow and more for more raucous depending.

There is lots to consider around compression, overlap aka LSA, duration split etc. I dont profess to know it all.
But Ive always chosen my own cams and will be doing any new ones as custom grinds. Again DYOR will be the best path.

Interestingly both Yanks and Ozzies agree for the most part on what constitutes a daily driver cam spec-wise.

mv6

Original Poster:

1,452 posts

271 months

Friday 21st March 2014
quotequote all
Thank you gents.Car will no longer be a daily,so I could go for something a bit more fruity! Plan to use AAS for the work.Look forward to seeing/hearing yours Mikey.