LS3 VXR8 airbox removal - help !
LS3 VXR8 airbox removal - help !
Author
Discussion

FishmanUK

Original Poster:

142 posts

195 months

Friday 21st March 2014
quotequote all
Attempting to fit my VCM intake and I am stuck on taking the standard airbox out.

I cannot get the bottom half out. The plastic will not pass the jumping point.



I guess I could leave it in there but ideally would get it out.

Any ideas ?

Thanks

ringram

14,702 posts

279 months

Friday 21st March 2014
quotequote all
It will go, I think I flexed the airbox bolt now I recall and bent it back in place smile

FishmanUK

Original Poster:

142 posts

195 months

Friday 21st March 2014
quotequote all
Thanks
Bending of screw support with much screw driver leverage and it is out !

now still lots to do. I'll probably be back soon smile

luisv8

446 posts

174 months

Friday 21st March 2014
quotequote all
When I took mine off I had to removed that jumping point... Easy job if u got the tools

FishmanUK

Original Poster:

142 posts

195 months

Friday 21st March 2014
quotequote all
All done (I hope)

Another quick question. On replacing the breather hose with the supplied slightly longer version the connection to the alloy tube is a sort of push fit that doesnt seem as good as a seal as the rubber hose connection that it replaced. Is this correct ?


daz9284

52 posts

164 months

Friday 21st March 2014
quotequote all
Yeah the connection on mine wouldn't click, so I cut it off and used the rubber from the original one

Regards
Darryl

jonnM

1,102 posts

170 months

Friday 21st March 2014
quotequote all
You've probably sussed it now, but IIRC the key to removing the lower part of the airbox is to remove that rubber washer, it gives you a couple of millimetres of extra room to get it past the jumping point.

FishmanUK

Original Poster:

142 posts

195 months

Friday 21st March 2014
quotequote all
Thanks all for the replies. While the instructions are pretty good they miss out some bits and give you little problems to solve.

took me about 4 hours I think smile

/edit. 4 hours for the entire intake system not the airbox removal. Annoyingly though I dropped one of the 3 plastic clips into the bumper somewhere. can hear it moving around if I hit the underside of the front bumper but cant get it out.