Exhibiting at a Trade Show? Fancy Something Free?
Exhibiting at a Trade Show? Fancy Something Free?
Author
Discussion

H18 ENF

Original Poster:

700 posts

200 months

Monday 24th March 2014
quotequote all
Hello All,

I have a new product offering and simply do not have the resources necessary to exhibit at a trade show myself and so would like to offer the product F.O.C to one of you lovely Phers.

It's a 360 degree Holographic display unit.

The model I have to offer you has a maximum image length of 39 cm and a height of approximately 20cm.

Please see an example of it working here http://www.youtube.com/watch?v=m0x2vSw7I_g

We will make the animation and video (Lasting 1 minute max) to run on the display advertising your product to your specification and the only thing I ask in return is that we can invite people onto the stand to look at our product.

I can realistically only give one away free, so if more than one of you reply then please please understand that I will of course have to opt to donate the HoloMyd to the one attending the trade show with the most opportunity to me.

Frimley111R

19,423 posts

265 months

Monday 24th March 2014
quotequote all
That's very cool but why not just do a better video and send it to exhibition companies?

H18 ENF

Original Poster:

700 posts

200 months

Monday 24th March 2014
quotequote all
Frimley111R said:
That's very cool but why not just do a better video and send it to exhibition companies?
Ultimately because the mailshot success rate is very minimal and the 'Wow' factor of seeing it live is better than seeing it on YouTube. I also then get to make an improved video at the tradeshow, showing visitor reactions etc.

That's the logic I'm going for anyway... smile

TheBMWDriver

594 posts

185 months

Monday 24th March 2014
quotequote all
Very cool, I have seen something like this in my local watch shop.


ReaderScars

6,087 posts

207 months

Monday 24th March 2014
quotequote all
Could this be a way for design/product development companies to showcase or display products to their clients remotely?

As in, does it have something like ethernet to upload images to? Can the client have one in the office and the design gets beamed into it from wherever to show them the updates the requested, etc?

insurance_jon

4,099 posts

277 months

Monday 24th March 2014
quotequote all
Wouldn't mind using this at the buy yorkshire conference in May. 3k delegates if that's any good?

H18 ENF

Original Poster:

700 posts

200 months

Monday 24th March 2014
quotequote all
Jon - that certainly looks interesting, could you drop me your details so we can have a chat?

Thanks for the positive comments.

It could be installed in a space and content could certainly be downloaded to it, just as suggested.

Plus it is not confined to just being that size, it can be a couple of metres wide if you wanted it to be, it's just that if I built my prototype that size I'd have no office left...

HoHoHo

15,405 posts

281 months

Monday 24th March 2014
quotequote all
We've rented these for clients in the past and it's very simple idea but effective however the ones we've rented are let down by the fact they are not 360 degree (or 180 if there's a back) holograms. You see the front and the side but it isn't a 360 degree hologram (if you see what I mean!), is yours the same?

I saw a large 360 degree hologram machine at a show a couple of weeks ago and that was very impressive, probably bloody expensive too!

H18 ENF

Original Poster:

700 posts

200 months

Monday 24th March 2014
quotequote all
Interesting, no mine are 360 degree.

Front, 2 sides and back.

Typically companies use 3 sided ones to create a black backgrounds to highlight the image. However because of the film I've applied mine doesnt suffer from the same the problem.

ReaderScars

6,087 posts

207 months

Tuesday 25th March 2014
quotequote all
Maybe you could have a tracker ball next to it so people could rotate the item inside.

mondeoman

11,430 posts

297 months

Tuesday 25th March 2014
quotequote all
wow

matjk

1,112 posts

171 months

Wednesday 26th March 2014
quotequote all
This looks very interesting, I'm a director at at a company that makes high speed laser engraving machines and we have a 4 x 2 m stand at the upcoming MACH exhibition, its a big show and takes over the 2 biggest Halls at the NEC with 1000's of visitors, we are in the Engineering & Laser Zone so this is would be quite a good 'fit' for this cool little device, our website http://www.halolasers.com and the show is http://www.machexhibition.com/ we do other large UK shows and plan some into Europe, I'd certainly in interested in having this on our stand.
Matt

H18 ENF

Original Poster:

700 posts

200 months

Wednesday 26th March 2014
quotequote all
That is indeed great to look at!

Being as I am based in Birmingham then this could be very convenient!

Could you drop me a pm with some contact details please.

Insurance Jon I've not forgotten you - very busy day yesterday and driving to Plymouth today - will email both tonight.

Really pleased that people see this as having legs.

smile

matjk

1,112 posts

171 months

Wednesday 26th March 2014
quotequote all
Toxicnerve, machines start at around £12'000 for a full system, handy for part marking and decorative parts, we are using one to engrave some titanium race harnesses for a well known UK sports car company this week, unfortunately no sample car was given for me to keep!

Mattt

16,664 posts

249 months

Wednesday 26th March 2014
quotequote all
Do you also sell the sharks?

H18 ENF

Original Poster:

700 posts

200 months

Wednesday 26th March 2014
quotequote all
Errrm...?

I can make you a shark...?

Does that qualify?

matjk

1,112 posts

171 months

Wednesday 26th March 2014
quotequote all
PM Sent (no sharks just bad tempered mutant sea bass)

VX Foxy

3,962 posts

274 months

Wednesday 26th March 2014
quotequote all
Might be too late, but we're almost literally next door to you in Aldridge, and we have a 120m stand at Light+Building in Frankfurt next week...
PM me if you think we can do something.

mondeoman

11,430 posts

297 months

Wednesday 26th March 2014
quotequote all
Small world smile, we're in Shelfield

matjk

1,112 posts

171 months

Friday 28th March 2014
quotequote all
Did this go any where, i didn't hear anything from my PM, anyone else?