Monaro ball joints, drop-links, general ignorance
Discussion
Are ball-joints a common failure point on monaros? The gaiters on both of mine appear to be split and I did both lower arms Dec 2012. Any pointers on where I can get just the ball joints? Also, I've just lowered my car, and am a bit concerned about the drop-links - admittedly I've not done the geometry yet, but am I right thinking there isn't a shorter drop-link substitute?
I'm running Pedders poly bushes on the drop-links and drag struts, but didn't manage to do the ARB - stupid question, but how much difference do the front poly ARB bushes make?
Finally, is this correct for an 04 CV8 with 2/3 of a road response pac?
Front toe: 4-5 mins
Front camber: -50 mins
Front caster: 6 deg 30 mins to 9 deg
Rear toe: 10 mins
Rear camber: -1 deg 41 mins to -25 mins
I am dense on suspension, and am having a bad day
I'm running Pedders poly bushes on the drop-links and drag struts, but didn't manage to do the ARB - stupid question, but how much difference do the front poly ARB bushes make?
Finally, is this correct for an 04 CV8 with 2/3 of a road response pac?
Front toe: 4-5 mins
Front camber: -50 mins
Front caster: 6 deg 30 mins to 9 deg
Rear toe: 10 mins
Rear camber: -1 deg 41 mins to -25 mins
I am dense on suspension, and am having a bad day

Edited by KMud on Wednesday 26th March 08:13
KMud said:
if I can get the ARB bushes in first
I didn't have a problem doing these, just required a couple of very long extension bars to get at the bolts from above..Ref the balljoints its possible to replace the just the boots permitting the joint itself is ok (gonna have to check mine as i'm sure there pedders ones as well).
JoyCV8 said:
I didn't have a problem doing these, just required a couple of very long extension bars to get at the bolts from above..
Ref the balljoints its possible to replace the just the boots permitting the joint itself is ok (gonna have to check mine as i'm sure there pedders ones as well).
Thanks - we just ran out of time and all various shades of ill. I did wonder if there was an argument for leaving the poly ARB bushes off for now though, i.e., less understeer. I'll talk to monkfish in the morning, I struggle with the search function on their site.Ref the balljoints its possible to replace the just the boots permitting the joint itself is ok (gonna have to check mine as i'm sure there pedders ones as well).
Photos:
https://www.dropbox.com/s/08jrmeq0ljksefn/IMAG1807...
https://www.dropbox.com/s/08jrmeq0ljksefn/IMAG1810...
As stupid as it sounds, I'm still not sure if they're split (same one shown above from 2 different angles). Anyway, it will be on a ramp tomorrow for tracking.
https://www.dropbox.com/s/08jrmeq0ljksefn/IMAG1807...
https://www.dropbox.com/s/08jrmeq0ljksefn/IMAG1810...
As stupid as it sounds, I'm still not sure if they're split (same one shown above from 2 different angles). Anyway, it will be on a ramp tomorrow for tracking.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff





What wheels are they please?
t really, they've only about 15 months/3k miles on them, and will cause grief next mot.