Sizes questions AJPV8

[Vee8ight]

A few questions please

1. What sizes and quantities of water hose clips are fitted to the AJPV8

2. What thread & size is water temp sender?

3. What thread & size is oil pressure sender?

Thinking of doing the Clock/Oil/water gauge upgrade, but I can't take the car off the road for more than a weekend

Thanks Darren

[pmessling]

I had the same questions when I done mine.

The oil pressure sender is the same thread as the oil pressure switch. Landrover item I believe. Google it and you should find out. As I can't remember.

Although you are doing the clock one not the spa one so you can use a sandwich plate that has the holes in them already.

Edited by pmessling on Sunday 30th March 11:27

Edited by pmessling on Sunday 30th March 12:14

[pmessling]

The metal pipes are 35mm so the hoses are another. 8 mm on top 4mm either side!!!

[Vee8ight]

pmessling said:

The metal pipes are 35mm so the hoses are another. 8 mm on top 4mm either side!!!

And the rad is 46 od

[Vee8ight]

pmessling said:

I had the same questions when I done mine.

The oil pressure sender is the same thread as the oil pressure switch. Landrover item I believe. Google it and you should find out. As I can't remember.

Although you are doing the clock one not the spa one so you can use a sandwich plate that has the holes in them already.

Edited by pmessling on Sunday 30th March 11:27

Edited by pmessling on Sunday 30th March 12:14

Wasn't going to do sandwich plate, should be able to get a reliable temp from oil pressure if I T it

[fatjon]

The two head coolant pipes are 37mm

[Tarmacshredder]

Hi Darren,
I have an ACT Silicon hose and water pipe kit to fit so have had a quick look at the jubilee clips supplied with there full kit, 6x22-30mm, 6x11-16mm and 14x27-51mm.
Hope that helps.