R8 rear lamps issues...
R8 rear lamps issues...
Author
Discussion

fastbikes76

Original Poster:

2,450 posts

153 months

Sunday 30th March 2014
quotequote all
OK so yeah... usual suspects rolleyes.

I have both rear lamps get slight condensation in them and I also have a faded red reflector in the drivers lamp ??

So how easy are these lamps to heat up and open so i can air them and reseal? Secondly I guess I need to track down a broken lamp unit to find a donor reflector or is there another fix ?

Cheers
Elton
thumbup

fastbikes76

Original Poster:

2,450 posts

153 months

Monday 31st March 2014
quotequote all
tumbleweedlaugh

ARAF

20,759 posts

254 months

Monday 31st March 2014
quotequote all
I don't know of anyone that has opened one yet, as they are bloody expensive, if you cock it up.

I would try and find a scrap one first, to practice on.

fastbikes76

Original Poster:

2,450 posts

153 months

Monday 31st March 2014
quotequote all
ARAF said:
I don't know of anyone that has opened one yet, as they are bloody expensive, if you cock it up.

I would try and find a scrap one first, to practice on.
I wouldn't mind finding a scrap one as I need a reflector any ways.

Im pretty confident with stuff like this and regularly open GTO headlamps and tail lamps...whats the worst that could happen eh biglaugh

ARAF

20,759 posts

254 months

Monday 31st March 2014
quotequote all
fastbikes76 said:
ARAF said:
I don't know of anyone that has opened one yet, as they are bloody expensive, if you cock it up.

I would try and find a scrap one first, to practice on.
I wouldn't mind finding a scrap one as I need a reflector any ways.

Im pretty confident with stuff like this and regularly open GTO headlamps and tail lamps...whats the worst that could happen eh biglaugh
You could open the side that Monkfish don't have secondhand one for £400. hehe

vxr2010

2,629 posts

190 months

Monday 31st March 2014
quotequote all
Hi have a look in FAQ I put a post on about how to dry headlights out , try it on your tail lights hope it works

fastbikes76

Original Poster:

2,450 posts

153 months

Monday 31st March 2014
quotequote all
vxr2010 said:
Hi have a look in FAQ I put a post on about how to dry headlights out , try it on your tail lights hope it works
Is that the drilling small holes top and bottom one ?

One of them is a brand new lamp fitted July last year..sadly I don't have the invoice too try get it replaced again frown

vxr2010

2,629 posts

190 months

Monday 31st March 2014
quotequote all
Hi on page 4 moisture in headlight no drilling needed

fastbikes76

Original Poster:

2,450 posts

153 months

Monday 31st March 2014
quotequote all
vxr2010 said:
Hi on page 4 moisture in headlight no drilling needed
Gotch thumbup

I will give that a go, hopefully the rear lamps will generate enough heat though. I guess leaving it in reverse will help too.

cool

vxr2010

2,629 posts

190 months

Monday 31st March 2014
quotequote all
Plus a hair dryer , it will look a bit weird doing it lol , but it should work

Z0m81e

249 posts

173 months

Tuesday 1st April 2014
quotequote all
If you just want to air out the rear lamps the reverse bulb twists and removes you could then use the hole to blow air through or something. That said i've had mine apart, twice in one case, and after I put them back together they still mist up. The process of removing the back of the lamp housing is largely one of patience you will likely make a bit of a mess of the plastic edge, I had to stick a screwdriver in the gap and twist which mashed the plastic up. Once its back on the car you can't see it so it doesn't bother me.

Gary H 2008

3,507 posts

220 months

Tuesday 1st April 2014
quotequote all
If you look really carefully at an E3 rear lamp, you'll see the inner design has changed slightly and incorporates...vent holes smile

fastbikes76

Original Poster:

2,450 posts

153 months

Tuesday 1st April 2014
quotequote all
So both rear lamps are out and I have found the issue..... the sticker that say's 'Made in Taiwan' rolleyesconfusedlaugh

They are both in the airing cupboard however i dont expect anything other than drilling some small holes top and bottom to work permanently. The lamps as stock have a two small breathers already however from my experience with GTo's constant misting lamps this is not enough to equalise the temperature differential between internal and ambient temps.

Also dont expect any miracles from 'New' lights as my brand new light bought from Newbury VX 8 months ago has a 2008 date sticker on it. Crazy thing is the 'New' lamp mists up more than the old lamp rolleyes

I will air them out for a couple of days and fit them on a day where they have enough time to have no temp difference and see how we go, if the misting returns I shall make a series of discreet holes top and bottom (which cant be seen without removing the lamp units) and see how that goes.


Mist free lights shall be mine evil

SteveMJ

919 posts

227 months

Tuesday 1st April 2014
quotequote all
If you can access the rear; could you put a small pack of desicant in?

Steve

Z0m81e

249 posts

173 months

Wednesday 2nd April 2014
quotequote all
SteveMJ said:
If you can access the rear; could you put a small pack of desicant in?

Steve
Don't know about other peoples but when I unsealed mine the factory had already wedged about 6 packs in the back of the unit biggrin

fastbikes76

Original Poster:

2,450 posts

153 months

Sunday 6th April 2014
quotequote all
So I decided to try air them out first,

I removed lamps from the car and took the reverse lamps out. I left lamps in airing cupboard for 2 days to completely dry out. The next bit is crucial... leave them in an environment close to ambient for another 24hours to naturalise the internal temp of the lights, if you go out and fit them straight away they will 100% be misted up the following morning. I left mine in the garage.

I refitted them and so far have had one warm sunny day, I then jet washed the car to death removing all the Sahara sand, and then had a night and day of rain.

Up to this point they are still 100% clear of any signs of moisture. I have no doubt this is NOT a permanent fix, but if I only have too do this once or twice a year that's good enough for me.

I will update this at the first sign of moisture..if I haven't topped myself first laugh