Failed MOT
Author
Discussion

Davep24

Original Poster:

62 posts

192 months

Friday 4th April 2014
quotequote all
Just got the Ro back from failing its MOT:

it failed on the following

1) both anti roll bar drop links excessive play in ball joint

2) battery not secure, it looks like the previous owner changed the battery for the wrong one

3) handbrake not working on one side

4) one of the track rod ends cover is split


The handbrake only looks like its being applied on one side, i.e the bar where the cable splits into 2 is lop sided, so it think either the cable or the brake is siezed.

With regard the track rod end, monkfish's website quotes the replacement having coarse thread, does this mean that some cars have the fine tread or all the monaros coarse.


On a good point, it flew through the emmission, CO was 0.00%, HC 2ppm and lambda bang on 1, so at least the engine is running well


Monaro5.7

7,337 posts

210 months

Friday 4th April 2014
quotequote all
Failed my mot yesterday on Front drop link and both track rod ends but i had them in my shed and i have the whiteline drop links which are adjustable so got the adjusted and the play was gone smile

What car do you have?

Davep24

Original Poster:

62 posts

192 months

Friday 4th April 2014
quotequote all
Monaro5.7 said:
Failed my mot yesterday on Front drop link and both track rod ends but i had them in my shed and i have the whiteline drop links which are adjustable so got the adjusted and the play was gone smile

What car do you have?
It a 2004 CV8,

funny thing is i have just bought the road response pack which has the drop link bushes and now i need new droplinks, the ones from monkfish include these bushes, so it looks like i will have a spare set.

stigmundfreud

22,454 posts

241 months

Friday 4th April 2014
quotequote all
how did they test the handbrake as these are trailing single shoes

Davep24

Original Poster:

62 posts

192 months

Friday 4th April 2014
quotequote all
stigmundfreud said:
how did they test the handbrake as these are trailing single shoes
not sure how they tested it, but they said it was only being applied to the passenger side. going to strip it down tomorrow to have a look.

Monaro5.7

7,337 posts

210 months

Saturday 5th April 2014
quotequote all
A company called Febi Bilstein list T.R.ends for the 04 Monaro which is the ones iam fitting but cant confirm they will fit till Monday hopefully.

But the part numbers for them are LH 14106 RH 14107.

Davep24

Original Poster:

62 posts

192 months

Saturday 5th April 2014
quotequote all
Monaro5.7 said:
A company called Febi Bilstein list T.R.ends for the 04 Monaro which is the ones iam fitting but cant confirm they will fit till Monday hopefully.

But the part numbers for them are LH 14106 RH 14107.
had a look at the febi bilsteins and the thread is M14 x 1.5mm, just measured the thread pitch on mine and its 2.0mm so i don't think these will fit.