Driving a car with a sequential box for the first time
Driving a car with a sequential box for the first time
Author
Discussion

madda

Original Poster:

41 posts

201 months

Saturday 5th April 2014
quotequote all
Hi all,

All being well I will be picking up my first car running a sequential box (Quaife 26z 5 speed dog box with no flat shift) on the weekend and I was wondering what advice you have for treating it nice on the 125 mile A-road trip home?

I have no clue what will put it at risk and how to treat it nice. Do I use the clutch and treat it like a normal box?

I do ride sports bikes and do plenty of track time other cars if that is relevant?

Thanks

NuisanceFactor

295 posts

213 months

Saturday 5th April 2014
quotequote all
madda said:
Do I use the clutch and treat it like a normal box?
I had a 6-speed sequential on loan for a while and as a way to reduce the pressure shocks on the drivetrain I found it best to use about 25% of normal clutch travel when changing up and about 75% going down. Ultimately, with practice, you will find what's best for you and your car, hope you have a lot of fun.

Johno

8,593 posts

311 months

Saturday 5th April 2014
quotequote all
Up - no clutch
Down - clutch

The boxes are designed to be used positively, don't fanny about and don't use the clutch on the way up. Just apply pressure to the lever and then when you're ready to change up, lift off the accelerator. The break in torque to the drive train will allow it to slot into place.

Downshifts, clutched, similar to above, but with clutch obviously ...

There again, mines used on track only smile


James.S

585 posts

241 months

Sunday 6th April 2014
quotequote all
earplugs......

James.S

585 posts

241 months

Sunday 6th April 2014
quotequote all
earplugs......

rort1

44 posts

227 months

Sunday 6th April 2014
quotequote all
eh......what?spin

sjmmarsh

551 posts

249 months

Sunday 6th April 2014
quotequote all
EARPLUGS!

Farlig

633 posts

181 months

sfaulds

653 posts

307 months

Monday 7th April 2014
quotequote all
With an old Quaife like that, shifting slowly and carefully would be my advice. They're pretty horrible devices - basically a type 9 with a nasty selector conversion to make them sequential.

Farlig

633 posts

181 months

Wednesday 9th April 2014
quotequote all
sfaulds said:
With an old Quaife like that, shifting slowly and carefully would be my advice. They're pretty horrible devices - basically a type 9 with a nasty selector conversion to make them sequential.
Nasty selector may be so, can´t comment myself, but a dog engagement is a dog engagement, not a fine tooth/synchro mesh. Slow shifting a non synchro dog box makes for some horrendous nasty banging & crunching...

BertBert

21,224 posts

240 months

Thursday 10th April 2014
quotequote all
I can't imagine that a crunchy sequential box in a 7 on the road to be any fun at all!