high level brake light cover removal ??
high level brake light cover removal ??
Author
Discussion

fastbikes76

Original Poster:

2,450 posts

153 months

Sunday 6th April 2014
quotequote all
Hi guys,

I need too remove the interior cover for the high level brake light, I need to clean the inside and didn't want to just yank on it without finding out first. Usually they just on 'poppers' but sometimes could be on screws under the head lining.

Any tips/clues ??

cheers
cool

motomk

2,188 posts

275 months

Monday 7th April 2014
quotequote all
According to the little book I have, ok not so little book, there are 3 screws under the headlining. They also say the headlining has to come out first. I would say only some of the bits at the back, just to lower it a little bit. Various bits of interior plastic have to come out. I don't know of any tricks. Looking at my car, I would say the side plastic on the back parcel shelf, maybe the handles above the back doors and that might lower it a bit. The instructions refer to about 8 other parts to remove, some of them wouldn't be necessary, like seats and lights in the roof.



fastbikes76

Original Poster:

2,450 posts

153 months

Monday 7th April 2014
quotequote all
motomk said:
According to the little book I have, ok not so little book, there are 3 screws under the headlining. They also say the headlining has to come out first. I would say only some of the bits at the back, just to lower it a little bit. Various bits of interior plastic have to come out. I don't know of any tricks. Looking at my car, I would say the side plastic on the back parcel shelf, maybe the handles above the back doors and that might lower it a bit. The instructions refer to about 8 other parts to remove, some of them wouldn't be necessary, like seats and lights in the roof.


Damn... not what I was hoping for lol

Thank you very much thumbup