Transmission up grades
Discussion
S60hsv said:
Just more for future reference don't want to make a mistake as am good at makin mistakes haha
Don't try too hard, and you'll fit in fine here. Hell, they've tolerated me for ages, so they can't be bad. 
As for the drive shafts, you'll probably do best to read through some old posts, and see what other people have found to work, and then copy them. They've already made the mistakes, and un-selfishly posted their findings, so that others don't make the same mistake again.

C/F driveshafts are not the answer. The last thing the Monaro needs is less weight at the back.
S60hsv said:
Hp max 05 monaro transmission
And diff
Has any one gone carbon drive shaft as would imagine this would have great affect one rpm pick up and reliabliaty of dif and gearbox and clutch as they are elastic and give slightly under hard launches but return how they are after
I'd say a carbon shaft on a relatively standard car would be a total waste of money, and just a potential for problems.And diff
Has any one gone carbon drive shaft as would imagine this would have great affect one rpm pick up and reliabliaty of dif and gearbox and clutch as they are elastic and give slightly under hard launches but return how they are after
Certainly wayyyyy down the list of desirable transmission upgrades, or certainly value for money ones.
Had a carbon prop on my Mitsuibishi GTO and it was great! Not seen anybody doing a CF prop on a Monaro / VXR8 over here but beware they can vibrate and that would drive me insane!
I've got a Tick Performance Level 5 gearbox that they warranty for over 900rwtq which is a LOT! I've had one of the UJ's removed from the prop as that was the only way to mount the new gearbox to the prop
I'll be doing some form of anti-hop drive shaft mod this year as she currently wheel hops enough to dislodge fillings
Obviously already have a beefy clutch to cope with the 770 torques she's currently putting out.
Can't see me doing anything else transmission wise for a long while yet...
I've got a Tick Performance Level 5 gearbox that they warranty for over 900rwtq which is a LOT! I've had one of the UJ's removed from the prop as that was the only way to mount the new gearbox to the prop

I'll be doing some form of anti-hop drive shaft mod this year as she currently wheel hops enough to dislodge fillings

Obviously already have a beefy clutch to cope with the 770 torques she's currently putting out.
Can't see me doing anything else transmission wise for a long while yet...
EmmaJ said:
Had a carbon prop on my Mitsuibishi GTO and it was great! Not seen anybody doing a CF prop on a Monaro / VXR8 over here but beware they can vibrate and that would drive me insane!
I've got a Tick Performance Level 5 gearbox that they warranty for over 900rwtq which is a LOT! I've had one of the UJ's removed from the prop as that was the only way to mount the new gearbox to the prop
I'll be doing some form of anti-hop drive shaft mod this year as she currently wheel hops enough to dislodge fillings
Obviously already have a beefy clutch to cope with the 770 torques she's currently putting out.
Can't see me doing anything else transmission wise for a long while yet...
Must be a mitsy thing a lot of Evo s do it I've got a Tick Performance Level 5 gearbox that they warranty for over 900rwtq which is a LOT! I've had one of the UJ's removed from the prop as that was the only way to mount the new gearbox to the prop

I'll be doing some form of anti-hop drive shaft mod this year as she currently wheel hops enough to dislodge fillings

Obviously already have a beefy clutch to cope with the 770 torques she's currently putting out.
Can't see me doing anything else transmission wise for a long while yet...
What's yr spec currently as yr profile shows a SC Ro... If you have a 122 Harrop fitted then there is no point upgrading to much unless it breaks as yr limited to 600hp anyhow. Clutch I imagine is already done.
Some on here are serious but nearly all have large workshops and the skill to rebuild engines and drive trains otherwise the labour costs would be seriously high. If that's you then fair play, if like me you have a garage and can do most basic bits then I'd just enjoy what you have and when you grow up buy a VXR8!
Some on here are serious but nearly all have large workshops and the skill to rebuild engines and drive trains otherwise the labour costs would be seriously high. If that's you then fair play, if like me you have a garage and can do most basic bits then I'd just enjoy what you have and when you grow up buy a VXR8!

As far as upgrades are concered the stock diff is s
t so an upgrade to a trutrac (for all round ability) or a kazz (if you like drifts) is worthwhile & as Emma has mentioned anti hop drive shafts are a needed if you want to drive the car hard off the line.
Stock gearbox might feel like it was taken out of a tractor but it's strong as long as it's looked after
t so an upgrade to a trutrac (for all round ability) or a kazz (if you like drifts) is worthwhile & as Emma has mentioned anti hop drive shafts are a needed if you want to drive the car hard off the line.Stock gearbox might feel like it was taken out of a tractor but it's strong as long as it's looked after
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



