Nice little low profile ls engine with a "small" cam
Nice little low profile ls engine with a "small" cam
Author
Discussion

ringram

Original Poster:

14,702 posts

279 months

Monday 7th April 2014
quotequote all
https://www.youtube.com/watch?v=6qGrsEp_WxI#t=92

"This is a New NRE engine coupled with Tom's new X-Ram manifold. Its an awesome combination. These Chevy LS engines clearly have much to offer. Side by side tests are presented of aftermarket manifolds. This NA engine makes some outrageous sounds."

stevieturbo

18,105 posts

278 months

Monday 7th April 2014
quotequote all
ringram said:
https://www.youtube.com/watch?v=6qGrsEp_WxI#t=92

"This is a New NRE engine coupled with Tom's new X-Ram manifold. Its an awesome combination. These Chevy LS engines clearly have much to offer. Side by side tests are presented of aftermarket manifolds. This NA engine makes some outrageous sounds."
Small cam by ballix lol They're even running it near 1500rpm to make it idle.

Still very impressive results and does show even the fancy aftermarket intakes are restrictive n/a

Although think they're confusing throttle response a little with simply allowing far more air in. Not quite the same thing.

ringram

Original Poster:

14,702 posts

279 months

Monday 7th April 2014
quotequote all
Yeah that isn't a small cam.

stevieturbo

18,105 posts

278 months

Tuesday 8th April 2014
quotequote all
I'm sure the engine/intake would still make a great package though when used with a more sensible cam

bimbleuk

156 posts

256 months

Tuesday 8th April 2014
quotequote all
I'm sure it makes a great drag engine but on the road .. no chance that would be driveable.

My Jenvey setup has 25% more throttle area but tiny inlet runners compared to that setup! Those runners looked huge.

ringram

Original Poster:

14,702 posts

279 months

Tuesday 8th April 2014
quotequote all
I take it you noticed the 600ft/lb at 2800?
Id suggest it was plenty drive-able.

jameshsv

5,844 posts

191 months

Tuesday 8th April 2014
quotequote all
That is AWSOME.

stick100

7,017 posts

199 months

Tuesday 8th April 2014
quotequote all
Only two throttle bodies! The pussys lol

bimbleuk

156 posts

256 months

Tuesday 8th April 2014
quotequote all
ringram said:
I take it you noticed the 600ft/lb at 2800?
Id suggest it was plenty drive-able.
I know but that's a lot of torque just off idle and coming in very quick.
Drove my Jenvey setup today for the first and even with a rough map it's very responsive. First thing I did turning out of the estate was give just a few beans and it picked up and slide the rear nicely smile

ringram

Original Poster:

14,702 posts

279 months

Tuesday 8th April 2014
quotequote all
Tell that to the FI guys. I know what you mean though, mine did 605ftlb on the engine dyno itself.
No need for FI. Pointless smile

jameshsv

5,844 posts

191 months

Tuesday 8th April 2014
quotequote all
stick100 said:
Only two throttle bodies! The pussys lol
I wonder if he does an intake for the ls1/2 laugh

ArnieVXR

2,458 posts

214 months

Tuesday 8th April 2014
quotequote all
Amazing how little power you can squeeze from such a big engine wink

anonymous-user

85 months

Tuesday 8th April 2014
quotequote all
ringram said:
Tell that to the FI guys. I know what you mean though, mine did 605ftlb on the engine dyno itself.
No need for FI. Pointless smile
Unless you want to go fast. I think you've just found the most gutless engine NRE have ever made. Same as a stock LS2 with bolt on blower. smile

raving

1,183 posts

221 months

Wednesday 9th April 2014
quotequote all
wormus said:
Unless you want to go fast. I think you've just found the most gutless engine NRE have ever made. Same as a stock LS2 with bolt on blower. smile
Blower ? Blown ! - Literally most of them

ringram

Original Poster:

14,702 posts

279 months

Wednesday 9th April 2014
quotequote all
wormus said:
Unless you want to go fast. I think you've just found the most gutless engine NRE have ever made. Same as a stock LS2 with bolt on blower. smile
Considering you don't take yours out of the driveway any
more in case it explodes Im not sure I need to respond further smile


anonymous-user

85 months

Wednesday 9th April 2014
quotequote all
ringram said:
Considering you don't take yours out of the driveway any
more in case it explodes Im not sure I need to respond further smile
In spite of being exploded on several occasions I've still managed 30k miles which shows I do use it. Latest engine built by Monkfish is a beauty. Spins so easily to 7k, grips and goes. Minimal wheelspin is kept under control with racelogic and I would give you a hiding at the strip. However, I cannot afford to build it again and we both know there are no guarantees if you go racing.