Help 400 SE Radiator.

[Donks]

Can any one tell me which RAD. fits a 1990 400SE. OR Which pipe runs along the bottom front of the RAD.
After HEARTY drive via. A46 from LEICESTER back to CO DURHAM the next outing it developed a fine spray out of the mesh gril .However on this outing not a lot of water was lost .ANY help welcome.

[wooly350i]

Good radiator refurb business should be able to sort you out, probably have to give them your old rad though for the headers on each end.

[adam quantrill]

Don't be tempted to use radweld apart from anything else the vibration on a wedge shakes it loose in no time.

You could keep it going by bunging liquid metal or filler on the OUTSIDE near where the leak is, this will lose you a few square inches of rad. Otherwise sort out a recore place and spray the nuts and bolts holding the rad & fan on with WD40 now to give it a chance to soak in...

[Donks]

Thanks for info.I will source a repair COMPANY as i know a Temp. repair will only prolong the inevitable .
Cheers.

[mojo 400]

A bit off topic but was that you driving up north road Durham yesterday.
Bryan.

[jmorgan]

Pipe on the bottom of the front? Oil cooler pipe or am I misunderstanding your description?

[Donks]

MOJO 400.
Tuesday North RD Durham and North RD Annfield Plain YES . No problem with RAD.at that time .
Hope to have it looked at today { Thursday } Cheers.

[JVaughan]

Well worth spending £400 on a new Ali Rad. Mine had a leak for almost 12 years, progressively getting worse. 3 years ago I opted for an Aly Rad and she hasnt lost a drop (well apart from a pair of head gaskets, but the rad is sound

[gmw9666]

this is what's in mine, cosworth alloy rad, slightly different brackets but fits nicely in the nose

let me know if you want any more pics

ps - they are loads cheaper as well