10 Minute clutch fluid change
10 Minute clutch fluid change
Author
Discussion

BigbadVXR

Original Poster:

257 posts

202 months

Sunday 13th April 2014
quotequote all
Working all day today but managed to get ten minutes to change the clutch fluid. Haven't done since I had the LS7 clutch fitted last year.
This was my clutch fluid:


My little set up:

I did clean out the reservoir before adding fresh.
Job done thumbup

snowwolf

11,503 posts

206 months

Sunday 13th April 2014
quotequote all
Easy when you have the easy bleed fitted, nice.

ARAF

20,759 posts

254 months

Sunday 13th April 2014
quotequote all
Refilling with white spirit though? hehe

BigbadVXR

Original Poster:

257 posts

202 months

Sunday 13th April 2014
quotequote all
ARAF said:
Refilling with white spirit though? hehe
Shush! Don't give my secrets away! wink

ARAF

20,759 posts

254 months

Sunday 13th April 2014
quotequote all
BigbadVXR said:
ARAF said:
Refilling with white spirit though? hehe
Shush! Don't give my secrets away! wink
laugh You might find the boiling point a tad lower. wink

neiljohnson

11,298 posts

238 months

Monday 14th April 2014
quotequote all
The easy bleed pipe certainly makes life a lot easier!!

THUNDER STORM

1,261 posts

200 months

Wednesday 16th April 2014
quotequote all
Mike, how come the fluid is so dirty, when changing it is so easy. Come on do it a bit more often.laugh

Adebyebye

S800VXR

5,877 posts

231 months

Wednesday 16th April 2014
quotequote all
Why don't you put the bleed nipple (oh er) through the bolt hole next to it, get rid of that nasty rusty plate someone has used!

Thats what I did on mine and thought everyoine did it that way now.


PS: You could also just leave it hanging loose and touching the exhaust manfold as mine was when I got it back from Tuner A. (not Monkfish or Walkinshaw BTW).

BigbadVXR

Original Poster:

257 posts

202 months

Wednesday 16th April 2014
quotequote all
THUNDER STORM said:
Mike, how come the fluid is so dirty, when changing it is so easy. Come on do it a bit more often.laugh

Adebyebye
I will now I've dug the kit out the shed wink

S800VXR said:
Why don't you put the bleed nipple (oh er) through the bolt hole next to it, get rid of that nasty rusty plate someone has used!

Thats what I did on mine and thought everyoine did it that way now.


PS: You could also just leave it hanging loose and touching the exhaust manfold as mine was when I got it back from Tuner A. (not Monkfish or Walkinshaw BTW).
I'll have a look at that after the weekend, thanks wink