Zircotec Benefits?
Discussion
Have it on my manifold on the focus compared to my brothers which has not
After a hard run I can touch my manifold 20 mins after stopping brothers takes an hour
I have no heat shield on my manifold but my brother does his bonnet still gets a lot hotter than mine
Better to have it done on a new exhaust as the coating will last a lot longer
Judging by how the ro's & r8's I've seen get under the bonnet it's worthwhile in my opinion
After a hard run I can touch my manifold 20 mins after stopping brothers takes an hour
I have no heat shield on my manifold but my brother does his bonnet still gets a lot hotter than mine
Better to have it done on a new exhaust as the coating will last a lot longer
Judging by how the ro's & r8's I've seen get under the bonnet it's worthwhile in my opinion
S800VXR said:
The process they have uses a plasma arc to melt the ceramic and this is sprayed onto the prepped surface where it bonds and solidifies in one. Supposedly it's the best.
Whilst I understand it is well respected in the auto industry, there are some pretty good coatings that are used in the aero industry, inside jet engines...........I wonder what GSD has in his shed.

S800VXR said:
Getting a full exhaust as soon as Roger gets it in and was wondering about the real world benefits of this coating on the headers...? Any experiance verses word of mouth would be appreciated as they are not far up the road from me.
My Zircotec headers, on the bike heat dissipation was not a consideration, durability was the reason I went for the Zercotec coating, so far I am pleased with the coating durability.

ARAF said:
Whilst I understand it is well respected in the auto industry, there are some pretty good coatings that are used in the aero industry, inside jet engines.....
......I wonder what GSD has in his shed.
I don't think you can afford the likes of MCrAlY + TBC! The processes by which they are applied are brutal if you ever get to watch it though ......I wonder what GSD has in his shed.


The cost is not cheap but the quality and service is exceptional
Once I spoke to them and the sent me the info about themselves and sent some video's of there process it was sold to me
I went for a performance colour (there words)due to the fact that plain white is porous and can stain
The cost was £840 which included them picking them up and returning them...if I had gone for white you can take £200 off
Then you have to remove and refit the manifolds so extra cost unless you can do it yourself
They advise 10 working days from when they receive them....mine took 6 days
ARAF said:
S800VXR said:
The process they have uses a plasma arc to melt the ceramic and this is sprayed onto the prepped surface where it bonds and solidifies in one. Supposedly it's the best.
Whilst I understand it is well respected in the auto industry, there are some pretty good coatings that are used in the aero industry, inside jet engines...........I wonder what GSD has in his shed.

Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff







