Pad performance from cold?
Discussion
The general consensus seems to be that Performance Friction pads are "best", but are there any compromises? I read a comment that performance when cold wasn't that great. Any experiences?
My front pads are shot (06 CV8) and I'm suffering the common steering-wobble under harder braking. With around 33k miles, the discs look in great condition, no lip, no ridges, so I don't want to go to VXR ones just yet.
The routes I take are fairly straight, mostly 30 limits & dual carriageways. Big braking into roundabouts leaves a lot of room for improvement, but it's infrequent and so I need performance from cold.
Thanks for any experiences.
Steve
My front pads are shot (06 CV8) and I'm suffering the common steering-wobble under harder braking. With around 33k miles, the discs look in great condition, no lip, no ridges, so I don't want to go to VXR ones just yet.
The routes I take are fairly straight, mostly 30 limits & dual carriageways. Big braking into roundabouts leaves a lot of room for improvement, but it's infrequent and so I need performance from cold.
Thanks for any experiences.
Steve
I didn't ever manage to cure the judder completely, but it was a lot better with PF pads.
I can't say I ever noticed anything about the performance of CV8 brakes other than them being woefully inadequate for stopping a car that weighs nearly two tons. I gave up rather quickly with the little CV8 brakes and went for some VXRs with braided hoses and now have much more confidence in the middle pedal.
That said, VXR brakes will stop you quite quickly but won't do it repeatedly (ie. on a track). I've driven cars with APs and similar and they have amazing stopping power and great feel to the brake pedal but I don't need the ultimate stopping performance (touch wood!) so I haven't spent the cash either.
I can't say I ever noticed anything about the performance of CV8 brakes other than them being woefully inadequate for stopping a car that weighs nearly two tons. I gave up rather quickly with the little CV8 brakes and went for some VXRs with braided hoses and now have much more confidence in the middle pedal.
That said, VXR brakes will stop you quite quickly but won't do it repeatedly (ie. on a track). I've driven cars with APs and similar and they have amazing stopping power and great feel to the brake pedal but I don't need the ultimate stopping performance (touch wood!) so I haven't spent the cash either.
Cheers guys
I already have some s/h VXR calipers on the shelf, but was loathed to spend nearly £400 on front discs for a 10mm increase in diameter, particularly as the pad contact area is the same. That's assuming that I could leave the rears alone. I thought I'd give the pads a go first, as I'm pretty sure that's where the main improvements will come from.
I already have some s/h VXR calipers on the shelf, but was loathed to spend nearly £400 on front discs for a 10mm increase in diameter, particularly as the pad contact area is the same. That's assuming that I could leave the rears alone. I thought I'd give the pads a go first, as I'm pretty sure that's where the main improvements will come from.
smgee said:
The general consensus seems to be that Performance Friction pads are "best", but are there any compromises? I read a comment that performance when cold wasn't that great. Any experiences?
My front pads are shot (06 CV8) and I'm suffering the common steering-wobble under harder braking. With around 33k miles, the discs look in great condition, no lip, no ridges, so I don't want to go to VXR ones just yet.
The routes I take are fairly straight, mostly 30 limits & dual carriageways. Big braking into roundabouts leaves a lot of room for improvement, but it's infrequent and so I need performance from cold.
Thanks for any experiences.
Steve
If you want OEM cold braking, OEM pads are always great.My front pads are shot (06 CV8) and I'm suffering the common steering-wobble under harder braking. With around 33k miles, the discs look in great condition, no lip, no ridges, so I don't want to go to VXR ones just yet.
The routes I take are fairly straight, mostly 30 limits & dual carriageways. Big braking into roundabouts leaves a lot of room for improvement, but it's infrequent and so I need performance from cold.
Thanks for any experiences.
Steve
Lots of performance pads do lack a little in the cold area though. You could try giving Brummie/Carbon Lorraine pads a shout.
I tried a set of his R6's or whatever they're called and cold braking was much better than the Ferodo DS2500's or AP404's I had before them.
So their R5's would probably be sueprb from cold.
smgee said:
Cheers guys
I already have some s/h VXR calipers on the shelf, but was loathed to spend nearly £400 on front discs for a 10mm increase in diameter, particularly as the pad contact area is the same. That's assuming that I could leave the rears alone. I thought I'd give the pads a go first, as I'm pretty sure that's where the main improvements will come from.
Front VXR discs from EBC have dropped in price check the FAQ for part numbers should be around 250 for the pair off ebay.I already have some s/h VXR calipers on the shelf, but was loathed to spend nearly £400 on front discs for a 10mm increase in diameter, particularly as the pad contact area is the same. That's assuming that I could leave the rears alone. I thought I'd give the pads a go first, as I'm pretty sure that's where the main improvements will come from.
Monaro5.7 said:
Front VXR discs from EBC have dropped in price check the FAQ for part numbers should be around 250 for the pair off ebay.
You're right! A quick search of the net shows:D7299 (plain) for £250
GD7299 (grooved) for about £300
That then begs the question, could I get away with leaving the rears alone and just changing the fronts to VXR discs? Also, EBC yellow of PF pads with these?!
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




