passenger interior door button not working

[RFC1]

I finally dragged my new cerbera out of the garage today, just a wee drive round my yard. I notice that the interior button to open passenger door does nothing. All other functions on driver and passenger doors are spot on. Any pointers for an obvious fix ?

sandy

Edited by RFC1 on Saturday 26th April 21:11

[sonnylad]

If door mirror one works ok on that door then its possibly just loose/dodgy wires in conector block from the internal switch, once door panel is off its an easy fix.

[RFC1]

sonnylad said:

If door mirror one works ok on that door then its possibly just loose/dodgy wires in conector block from the internal switch, once door panel is off its an easy fix.

Thanks mate, will have a look. Door panel easy to remove?

sandy

[Jhonno]

Yes.

Could be the connectors in the footwell as well/instead.

[RFC1]

Jhonno said:

Yes.

Could be the connectors in the footwell as well/instead.

Thanks Johnno, will check them also. Damned thing is i cant remember if the button worked when i got the car just before xmas........

[RFC1]

It was the connector block from interior button needed a clean up. Thanks Sandy