newbie drying carpets already
newbie drying carpets already
Author
Discussion

kebabos

Original Poster:

10 posts

262 months

Tuesday 30th November 2004
quotequote all
Hi guys,picked up my 98 4.0 chimp on Saturday and am loving it!Though I've got a couple of questions for all you Jedi dudes.
First where does the driver footwell carpet usually get soaked from,I notice theres a black dome on the inner wing thats already been mastic'd to oblivion
and
Second whats that small twiddly thing on the steering column,its not instrument dimmer or wiper delay any clues?
Lastly is the wipers failure to park consistently an easy fix?
Of course none of this matters when i get my dose of v8 at tickover mmmmmm
Cheers

beano500

20,854 posts

304 months

Tuesday 30th November 2004
quotequote all
Ah yes

Water Ingress - could possibly be:

-collecting in front wing under where that mastic is - well spotted
-roof
-door rubbers
-collecting in door because drain holes are blocked
-round windscreen if not fitting properly

Plenty of other possibilities have been suggested.

Knob?

Alters the delay on the windscreen wipers' intermittent setting!

Welcome to TVR-dom

Quirk #3? Dunno, there'll be a smartypants along any moment though!!!

Can I squeeze in a quick "They All Do That Sir!" ?

fatboychim

979 posts

280 months

Tuesday 30th November 2004
quotequote all
If the carpet gets really wet its a good thing, cos when you're upside down in the footwell with your friend pouring on water you can see where its coming from. Usual suspects are: BRAKE RESEVOIR check rubber seal--- BLACK INSPECTION COVER( as yours is masticked up try cleaning all old mastic off and start again)and check clutch fluid whilst at it--- and the holes behind the pedals. There are many other causes and of course most water ends up in the footwells anyway, just keep looking. Congrats on getting your car, enjoy it even if it is a bit wet

fatboychim

979 posts

280 months

Tuesday 30th November 2004
quotequote all
oops sorry to duplicate Beano, started writing before dinner and finished off without checking

chimalsu

279 posts

267 months

Wednesday 1st December 2004
quotequote all
sounds like the contact arm on the wiper motor is weak and breaking contact early there is a round plate at the top of the motor,remove this and you should see copper contacts just bend these out so as to make better contact and reassemble.welcome to the world of tvr it takes some getting used to but becomes a drug

SiH

1,858 posts

276 months

Wednesday 1st December 2004
quotequote all
Afternoon all, just my tuppence worth on the park switch thing. If you look at the location of the park switch it's just beneath the wiper motor. Bearing in mind the exposure this place gets to the elements it's no wonder it gets corroded and generally knackered. It can be removed and cleaned thoroughly which may resurrect it for a while. You may find it easier to just buy a new park switch and then reattach it covered in loads of vaseline or some such other protectant. It's just one of those TADTS things I'm afraid.
P.S. I've just started to use Firefox from Mozilla and want to see if the smileys work........ here goes....
<img src="http://www.diegotorres.com.ar/mensajeitor/foro/caritas/monodsdsd.gif" />

<img src="http://www.todojuegos.com/modules/Forums/images/smiles/ham_sniff.gif" /><img src="http://home.t-online.de/home/bullitt667/smilies/data/uglypanzer.gif" />

kebabos

Original Poster:

10 posts

262 months

Wednesday 1st December 2004
quotequote all
Cheers guys thats all much appreciated!!!
I bought mine with a view to running it everyday so this sort of stuff would be nice to get sorted.I must try and clean up the wishbones as well,they are starting to peel.
Back to paintimg the kitchen!!
Laters