Loose rear suspension bolt on vxr8
Loose rear suspension bolt on vxr8
Author
Discussion

snowwolf

Original Poster:

11,503 posts

206 months

Saturday 3rd May 2014
quotequote all
Had to get the car up to Neil's garage today as I could see oil seapage on sump, was expecting it to be main front seal leaking but Neil got it up on ramp and it was bone dry at main front seal and he also took the cover off that reveals the fly wheel and that was dry too, the seapage is coming from sump gasket which was good to know, at least it's not drastic and not really enough of a leak to do anything about.

While Neil was checking over under the rest of the car he noticed a very loose bolt on each side of the rear suspension which to me as been like it since a well know V8 specialist ( NOT MF ) fitted the pedders suspension, the two bolts are a bit hard to get to with a spanner so thought it was easier to leave loose.


mik_ok

1,580 posts

272 months

Saturday 3rd May 2014
quotequote all
eek that's not good Mike.

Which bolts are they? Hard to tell from the image,

snowwolf

Original Poster:

11,503 posts

206 months

Saturday 3rd May 2014
quotequote all
mik_ok said:
eek that's not good Mike.

Which bolts are they? Hard to tell from the image,
They are the top spring locating bracket.

Mik was it you that replaced the oil in diff with oil you got from land rover ?

neiljohnson

11,298 posts

238 months

Sunday 4th May 2014
quotequote all
Certainly an odd one mick!!