Dipped beam warning light

[fog66]

I have a Mark 1 with the three buttons for side, dipped and fog lights. My problem is that the blue bulb no longer illuminates when you switch on the middle (dipped beam) button. Everything else is fine the lights are on etc. It's not the bulb as I've tested that. I guess my question is where are the two wires coming from so I can trace them back and find the problem? Multimeter shows no voltage when engaging switch.

Cheers for any thoughts.

[ukdj]

Isn't the blue tell tale light only meant to come on when engaging "hi-beams" as opposed to normal main headlights?

[fog66]

Ahhhh, if that's the case then I get numpty TVR owner of the week award!! you are probably dead on and I've been a complete tool. I shall try main beam tonight and see if it lights up. God I can't believe it what a doughnut.

[portzi]

fog66 said:

Ahhhh, if that's the case then I get numpty TVR owner of the week award!! you are probably dead on and I've been a complete tool. I shall try main beam tonight and see if it lights up. God I can't believe it what a doughnut.

dougnuts are on you then !! . l like the custard ones please

mark

[fog66]

Custard is not for doughnuts, yurgh! Keep em plain or jam if you must.

[2 sMoKiN bArReLs]

..and the fog light goes out when high beam is engaged!

[portzi]

fog66 said:

Custard is not for doughnuts, yurgh! Keep em plain or jam if you must.

[rigga]

2 sMoKiN bArReLs said:

..and the fog light goes out when high beam is engaged!

Really? That's not right.

[2 sMoKiN bArReLs]

rigga said:

2 sMoKiN bArReLs said:

..and the fog light goes out when high beam is engaged!

Really? That's not right.

Logical though ain't it...

[QBee]

2 sMoKiN bArReLs said:

rigga said:

2 sMoKiN bArReLs said:

..and the fog light goes out when high beam is engaged!

Really? That's not right.

Logical though ain't it...

It goes out on my daily driver.....I think. I must follow myself sometime to check.