DS2500 pads

[Chuggaboom]

Anyone here bought them for their Tam/T350/Tuscan with AP CP6600 callipers ?

If yes, would you happen to know the part number for them enabling a search online please.

Thanks.

[A900ss]

I'm not trying to put a downer on DS2500's, just to make sure you're aware. They are not E marked so are not for road use. Make sure your insurers are aware because brakes will be the first area they check if you're involved in a high personal injury claim.

Eyes open that's all. From what I hear, they are great pads.

Best of luck.

[sascha]

i have them here out of the box, the front & rear are stamped with: FRP 3083H and the rear FCP 408H

the labels on the ferodo boxes was removed by the tvr-supplier who sended me these, so hope that the n°'s are right.

Edited by sascha on Friday 30th May 11:42

[Sevenman]

A900ss said:

I'm not trying to put a downer on DS2500's, just to make sure you're aware. They are not E marked so are not for road use. Make sure your insurers are aware because brakes will be the first area they check if you're involved in a high personal injury claim.

Eyes open that's all. From what I hear, they are great pads.

Best of luck.

I thought that the stock pads for a Tamora (and probably others) were Ferodo DS2500 front and DS25HP rear. That is what AP recommend and can be supplied by some TVR specialists, e.g. TVR Power.

I have them on my car and have used them in the past on other cars with good results when on track.

[slimtater]

I am sure these are the ones Power fitted to my T350 last month - I had the 322mm disc upgrade at the same time:

http://www.powersperformance.co.uk/store/slug/fron...

[Chuggaboom]

sascha said:

i have them here out of the box, the front & rear are stamped with: FRP 3083H and the rear FCP 408H

the labels on the ferodo boxes was removed by the tvr-supplier who sended me these, so hope that the n°'s are right.

Edited by sascha on Friday 30th May 11:42

Thanks. Ordered.