brake lights on dash and buzzer
Discussion
Hey everyone got another problem here. so my brake lights work however the buzzer underneath the footwell wont turn off unless I unplug it... While itz buzzing my brake lights work but the 2 brake lights on the dash stay lit up. Does that mean the plunger sensor on the brake pedal is bad or is there a sensor somewhere on the car I need to check
There is a harness plug that has a bunch of wires, one of them goes to a black buzzer box wire tied to the frame underneath the driver side footwell. If i unplug that harness it stops the buzzer and then the brake lights don't work. I plug it back in, and the brake lights work, but then it illuminates the 2 brake lights on the dash, (not the parking brake) but the brake lights themselves. I'm guessing it's an alert for "failed brakes" I have fluid in the cylinder but it's leaking, could just be a faulty master cylinder or slave cylinder.
I haven't had a check to look into it more, been working on the Pantera but i'll get back to it this week and keep everyone posted. Cheers!
I haven't had a check to look into it more, been working on the Pantera but i'll get back to it this week and keep everyone posted. Cheers!
Gassing Station | Wedges | Top of Page | What's New | My Stuff


