Spark Plug Extenders
Discussion
When I broke some of mine, I managed without some of them for a while until I had replacements. Cylinders 1 - 4 (the front 2 on each side) can have the HT lead straight onto the plug without touching the exhaust manifold if you're careful. The overall resistance change didn't seem to make much difference. The extenders are about 5k ohms resistance and the leads themselves are more than that.
This means that the leads will get quite hot but if needs must...?
The rear 2 on each side IMHO, definitely need the extenders.
This means that the leads will get quite hot but if needs must...?
The rear 2 on each side IMHO, definitely need the extenders.
Unfortunately ACT are out of stock!! Seems to be a common problem!!
Think I'll give it a go removing the front 4 and then go from there. I suspect I know which one it is, number 4, but let's see what happens.
As a point of interest, where do you get the socks from? I've tried M&S but they don't seem to have any!!
Thanks for your help.
Think I'll give it a go removing the front 4 and then go from there. I suspect I know which one it is, number 4, but let's see what happens.
As a point of interest, where do you get the socks from? I've tried M&S but they don't seem to have any!!
Thanks for your help.
http://www.ebay.com/itm/330591316677
Try these had them on 6 months no probs and were here in the week
Try these had them on 6 months no probs and were here in the week
jojackson4 said:
http://www.ebay.com/itm/330591316677
Try these had them on 6 months no probs and were here in the week
Just to confirm my understanding, you put the Standard HT lead onto the spark plug and this 'sock' just acts as an insulator to protect the HT lead from heat? It's not actually connected to the HT lead or the spark plug?Try these had them on 6 months no probs and were here in the week
Thanks.
jojackson4 said:
http://www.ebay.com/itm/330591316677
Try these had them on 6 months no probs and were here in the week
Thanks for the link. Bought them at £27.90 which is about 1/3 of the price of extenders. Try these had them on 6 months no probs and were here in the week
phazed said:
Yep, about all today.
they are used,so foc.
I'll pm you my details from a pc, cant from this phone.
Thanks for the offer and I did call this afternoon.they are used,so foc.
I'll pm you my details from a pc, cant from this phone.
I don't think this is the problem as it only occurs when hot. What happens is that when i accelerate under load it feels as though i hit the rev limiter! This gets progressively worse until I am struggling to go up hills!!
Could it be the ecu or would that be there all the time?
Also I find the slow running difficult to set as seems to speed up! Running at 900 rpm most of the time but does creep up to 1100.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


