reverse light failure on 2008 Audi A6 avant
Discussion
I'm trying to trace a fault on my Audi A6 avant.
I had the lamp warning light on the dash come on, and so duly replaced the bulb (brand new) on the driver's side reversing light. However the light still does not work, so I am looking for other approaches. I'm no electrical genius, but I figured there must be some other simple checks I can make before giving up!
All the other lights work fine, including the passenger side reversing light.
Any thoughts?
Thanks!
I had the lamp warning light on the dash come on, and so duly replaced the bulb (brand new) on the driver's side reversing light. However the light still does not work, so I am looking for other approaches. I'm no electrical genius, but I figured there must be some other simple checks I can make before giving up!
All the other lights work fine, including the passenger side reversing light.
Any thoughts?
Thanks!
I had the same issue recently, with the same bulb.
The problem was with the earth pin on the plug from the car's wiring loom that goes in the rear inner light cluster. It'll need cleaning off with a small flat blade screwdriver and maybe some contact fluid. It took quite a few attempts to clean it up on mine. The pin looks clean on the face of it. It's one of the outer pins.
The problem was with the earth pin on the plug from the car's wiring loom that goes in the rear inner light cluster. It'll need cleaning off with a small flat blade screwdriver and maybe some contact fluid. It took quite a few attempts to clean it up on mine. The pin looks clean on the face of it. It's one of the outer pins.
Maracus said:
I had the same issue recently, with the same bulb.
The problem was with the earth pin on the plug from the car's wiring loom that goes in the rear inner light cluster. It'll need cleaning off with a small flat blade screwdriver and maybe some contact fluid. It took quite a few attempts to clean it up on mine. The pin looks clean on the face of it. It's one of the outer pins.
This - appears to be an A6 design fault. My saloon did it with rear lights. Fixed with contact cleaner and a little emery paperThe problem was with the earth pin on the plug from the car's wiring loom that goes in the rear inner light cluster. It'll need cleaning off with a small flat blade screwdriver and maybe some contact fluid. It took quite a few attempts to clean it up on mine. The pin looks clean on the face of it. It's one of the outer pins.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


