Targa roof measurements

[portzi]

hello guys,
could some kind sole please measure the outside diamensions of the targa roof please, as I am away for my Chim all week

Mark

[QBee]

portzi said:

hello guys,
could some kind sole please measure the outside diamensions of the targa roof please, as I am away for my Chim all week

Mark

If no sole (pirate or otherwise) chips in with the answer I will look for you later this evening. 125 miles from the car right now.

[JWzed]

Hi Portzi.
Measurements as follows:-
Length including roof curve - 1310mm
Length measured from the underside ie straight 1210mm
Width inc curve 610mm (measured in the middle).
Width inc curve including screen and hoop recess flanges 650mm (measured in the middle of the roof).
Width (middle) measured from the underside - 590mm, with flanges 630mm
Width at the window ends 550mm. Hope this helps.

[portzi]

Thanks John, much appreciated. And an engineer to boot. I though the measurements you put down were of an engineering ilke

Mark

[JWzed]

Glad to be of help. My minds working overtime as to why you would need them.

[QBee]

He's probably fabricating a stainless steel one at work. That was the reason for wanting brake fluid reservoir dimensions a few months back !

[portzi]

QBee said:

He's probably fabricating a stainless steel one at work. That was the reason for wanting brake fluid reservoir dimensions a few months back !

Ha Harrrrr Anthony, I am making something but its not out of metal .

[portzi]

JWzed said:

Glad to be of help. My minds working overtime as to why you would need them.

Hi John
I have seen your posts on the Car club forum, its nice to have PHeds and the car club to get info off from freindly chaps. Its nothing special, nothing thats not been made before .

mark

[JWzed]

Much appreciated Mark. Rgds