4.5 parts

[steve320ise]

Hi has anyone got any 4.5 engine parts going before I start pricing up from dealers, not too sure what I need yet but you never know what is lurking about on here,cheers

[john wyatt]

I have a pair of heads, believe they are good used but not even unwrapped them, also a pair of new/newly profiled race profile cams

[Cerbieherts]

John, I may well be interested in both heads and cams..pm me if they are still up for grabs.

Cheers,

Eddie.

[longbow]

Pretty sure there is a 4.5 on ebay at the moment. It isn't cheap, but its the only one. I suspect pricing individual parts from dealers will quickly run into silly money, so buying a used lump might be the cheapest route.

[jamieduff1981]

James Boffney (on the Cerbera Facebook group) had a load of 4.5 spares following his botched rebuild fiasco.

[steve320ise]

Thanks to all , I have not had any joy as yet, I know more of what I need now, I need 8X 4.5 liners, 1 con rod, set of standard piston rings, bottom end bearings and clutch with cylinder, cheers

[spitfire4v8]

Andy at APM would be the person I'd talk to .. must build more ajp8s than all the other builders put together ?

[gruffalo]

I have a crank, pistons and conrods if you are interested.

[ukkid35]

gruffalo said:

I have a crank, pistons and conrods if you are interested.

Do you happen to have the big washer at the crank nose, between the crank bolt and aircon pulley? That would really help me out.

Just realised, that it wouldn't have been left over from your 4.7 build, unlike the other parts...

[gruffalo]

ukkid35 said:

gruffalo said:

I have a crank, pistons and conrods if you are interested.

Do you happen to have the big washer at the crank nose, between the crank bolt and aircon pulley? That would really help me out.

Just realised, that it wouldn't have been left over from your 4.7 build, unlike the other parts...

Sorry no, used in the rebuilt engine:-(