pcm problem - cutoff protection pcm temperature
pcm problem - cutoff protection pcm temperature
Author
Discussion

tails007

Original Poster:

11 posts

146 months

Sunday 6th July 2014
quotequote all
Hi all. I have a 2005 carrera S. Having a problem with the PCM. It will turn on for around 20 seconds and then turn itself off. If I keep driving for a while it will eventually turn itself on again but will then turn off again after about 20 seconds... And that cycle continues.

Error message displayed on the pcm screen is 'Cutoff protection temperature PCM'.

I've tries holding down the three keys to reset the PCM and that hasn't worked. I've also tried starting the PCM with the nav disc removed and that didn't work either.

Does anyone know what to do?

Cheers

kippaxking

185 posts

249 months

Sunday 6th July 2014
quotequote all
I had exactly the same message while driving to Le Mans a few years ago. The outside temperature was 34degrees and the front boot was full of camping gear, some of which had blocked the DVD unit. It never happened again.

Had the car been sitting in direct sun? Is there anything blocking the Sat Nav system in the boot?


tails007

Original Poster:

11 posts

146 months

Sunday 6th July 2014
quotequote all
Thanks for the reply. There's hardly anything in the boot, only thing covering the nav unit is the 'door' panel that covers it.. So I assume that doesn't count...

The weather has been warm recently but I assume the car was designed for much warmer countries than the UK?

Does the nav unit have some sort of fan to keep it cooled? Could it be that that has stopped working?

kippaxking

185 posts

249 months

Sunday 6th July 2014
quotequote all
In my case it was a definite case of over-heating. Once the unit had cooled it worked fine and I kept the car for four years and it never happened again. They test these cars in Death Valley at 50 degrees plus so I was still surprised...

Sorry I can't be more help. Maybe a friendly (!) OPC may help?

Good luck.

tails007

Original Poster:

11 posts

146 months

Monday 7th July 2014
quotequote all
Thanks Kipp. I'll give it a go tonight as it will have been in the garage out of sunlight for a few days... Not optimistic though :-(

markiii

4,288 posts

223 months

Monday 7th July 2014
quotequote all
had similar issues

turned out to be a dodgy Nav disc causing the drive to overheat whilst constantly trying to read the disc

replaced with a new disc and the problem went away

tails007

Original Poster:

11 posts

146 months

Monday 7th July 2014
quotequote all
markiii said:
had similar issues

turned out to be a dodgy Nav disc causing the drive to overheat whilst constantly trying to read the disc

replaced with a new disc and the problem went away
thanks Markii... lets hope its something that simple.

Can I just buy any old nav disc, ie look on ebay for the most recent? Or do I need to match up a certain edition against the exact unit that i have in my car? If so, how do i find out the unit type thats in my car?

Cheers!



cd1957

648 posts

205 months

Monday 7th July 2014
quotequote all
Hi there are two software options for 997/987,and if you install the wrong sat/nav disc it will cause software
conflict, put a diagnostic on it to confirm drive temp, I had a 987 with same issue.

Chris

tails007

Original Poster:

11 posts

146 months

Monday 7th July 2014
quotequote all
cd1957 said:
Hi there are two software options for 997/987,and if you install the wrong sat/nav disc it will cause software
conflict, put a diagnostic on it to confirm drive temp, I had a 987 with same issue.

Chris
Thanks CD, how do i do that? Take it to the Porsche center or can I access that info on the PCM somehow?

tails007

Original Poster:

11 posts

146 months

Monday 7th July 2014
quotequote all
markiii said:
had similar issues

turned out to be a dodgy Nav disc causing the drive to overheat whilst constantly trying to read the disc

replaced with a new disc and the problem went away
Hi markii do you know what Nav disc I need for my setup?

tails007

Original Poster:

11 posts

146 months

Monday 7th July 2014
quotequote all
cd1957 said:
Hi there are two software options for 997/987,and if you install the wrong sat/nav disc it will cause software
conflict, put a diagnostic on it to confirm drive temp, I had a 987 with same issue.

Chris
Hi Chris do you know what nav disc I should have for my setup?

My nav disc says: for use only with external DVD-navigation unit 10.2004

997.642.235.03
7L5.919.859.F

When pressing trip and main on PCM it says SW versions 1.0

PCM target + actual: 04202JD1 / 3004

System software target+actual: 04113AD1/1104

Amplifier target+actual: 00017500/3504

CD changer target+actual: C38/3003

Nav system: (no target presumably because disc was removed?)
Navy target: 00174156/2704

Phone target+actual: 04464AD2/4604



cd1957

648 posts

205 months

Tuesday 8th July 2014
quotequote all
Hi can you confirm exact year of your car because you could have model care A or B software,the pcm 2.1 model disc for model CARE B,this is the REPAIR KIT disc is part number 000.043.205.46.007.This is not a sat/nav disc its purely software.There is also a set procedure to make it install.

Chris

tails007

Original Poster:

11 posts

146 months

Tuesday 8th July 2014
quotequote all
cd1957 said:
Hi can you confirm exact year of your car because you could have model care A or B software,the pcm 2.1 model disc for model CARE B,this is the REPAIR KIT disc is part number 000.043.205.46.007.This is not a sat/nav disc its purely software.There is also a set procedure to make it install.

Chris
Hi Chris.. My number plate is an 05.

Are you able to advise?

Thanks very much for your help!