Electric power steering pump...
Discussion
I am about to fit a Saxo/106 electric power steering pump to my Griff 500 in place of the normal hydraulic unit. I believe that this is the same pump as used in the T350.
Would appreciate it if someone could tell me what size of fuse is used for the pump, and does that fuse solely protect the pump or is it shared with any other component?
Thanks in advance.......
Would appreciate it if someone could tell me what size of fuse is used for the pump, and does that fuse solely protect the pump or is it shared with any other component?
Thanks in advance.......
Seem to remember its an 80amp fuse, and it is fed directly from the battery to the pump relay.
You can supply the relay coil feed from one of the alternator connections, think it is the D+, have done it on my Tamora , but my memory fails me!
This mean that the steering pump doesn't run whilst cranking.
You can supply the relay coil feed from one of the alternator connections, think it is the D+, have done it on my Tamora , but my memory fails me!
This mean that the steering pump doesn't run whilst cranking.
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff


