Standard Back Box Required

[Erich Stahler]

Anyone know where I can get one, or does anyone have one? I have finally got fed up with sports system!

[purpleliability]

If you are struggling to find one, you could always try decat silencers and silenced mid pipes from ACT.

[Byker28i]

I agree - mine looks like


Additional Silencing in the centre pipes and in the tail pipes
I wouldn't go back to a standard box. Large, heavy, poor road clearance

[spitfire4v8]

There's a std backbox on ebay right now.
The act stuff is lovely, I sell their large back box and it sounds and looks fabulous.

[gruffalo]

spitfire4v8 said:

There's a std backbox on ebay right now.
The act stuff is lovely, I sell their large back box and it sounds and looks fabulous.

+1 for this, nice noise but fairly quiet, I seem to read around 98dB at a static noise test now.

[Byker28i]

gruffalo said:

+1 for this, nice noise but fairly quiet, I seem to read around 98dB at a static noise test now.

Have you got the cats in? Is this a copy of the old SP exhaust?

[gruffalo]

Byker28i said:

gruffalo said:

+1 for this, nice noise but fairly quiet, I seem to read around 98dB at a static noise test now.

Have you got the cats in? Is this a copy of the old SP exhaust?

No CATS and still 98dB:-)

[Erich Stahler]

Byker28i said:

I agree - mine looks like


Additional Silencing in the center pipes and in the tail pipes
I wouldn't go back to a standard box. Large, heavy, poor road clearance

Poor road clearance, would have thought there was only a nat's in it depth wise.

[Byker28i]

I had 75-80 mm clearance to the road from the bottom of the exhaust. I had to be ally careful going over speed humps, ramps etc. I have lots more with the act exhaust fitted, so I haven't touched anything in a while now.. Outriggers are 120mm front 130mm rear to the road