WiFLi on the cheap for Shimano users
Discussion
So SRAM make a lot of noise about their WiFLi kit for climbers and I fancied a similar setup on my Shimano Claris/2300 mix equipped road bike. It's now a spare bike for pottering around, and gets used by visitors who are often not seasoned cyclists and I wanted a more climb-friendly ratio than the 34-25 which it came with.
So, a quick look on Wiggle came up with this:
Sora rear mech, med cage
http://www.wiggle.com/shimano-sora-9-speed-short-c...
8 speed cassette 11-30 tooth (could have had 11-34 but thought it was overkill)
http://www.wiggle.com/shimano-cs-hg41-8-speed-cass...
9 speed version if you're running a 9 speed drivetrain at the mo...
http://www.wiggle.com/shimano-hg50-9-speed-cassett...
Plus a new chain
http://www.wiggle.com/kmc-z8s-silgray-chain-116l/
All for about £25 and I have a bike which can ride up a vertical wall. It took a few mins to fit and set up, the only other change was to raise the front mech a couple of mm so it didn't rub when the chain was on the rear 30T cog. It makes a huge difference, and is so much easier to spin your way up a big hill now.
So, a quick look on Wiggle came up with this:
Sora rear mech, med cage
http://www.wiggle.com/shimano-sora-9-speed-short-c...
8 speed cassette 11-30 tooth (could have had 11-34 but thought it was overkill)
http://www.wiggle.com/shimano-cs-hg41-8-speed-cass...
9 speed version if you're running a 9 speed drivetrain at the mo...
http://www.wiggle.com/shimano-hg50-9-speed-cassett...
Plus a new chain
http://www.wiggle.com/kmc-z8s-silgray-chain-116l/
All for about £25 and I have a bike which can ride up a vertical wall. It took a few mins to fit and set up, the only other change was to raise the front mech a couple of mm so it didn't rub when the chain was on the rear 30T cog. It makes a huge difference, and is so much easier to spin your way up a big hill now.
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff


