Dam mini electrics lights/indicators/hazards!!!!!!
Discussion
hi all again, got my classic mini purrrring away again. Thanks for all the advise, now we have some electric probs.
1.indicators only work on drivers side not passenger side all bulbs seem fine?
2.no hazard lights at all?
3.got side lights and main beam but no dip beam?
many thanks in advance
kev
1.indicators only work on drivers side not passenger side all bulbs seem fine?
2.no hazard lights at all?
3.got side lights and main beam but no dip beam?
many thanks in advance
kev
Most likely the bullet connectors have corroded behind the front grille.
Happened to me on a couple of minis, need replacing really, you can clean them but it's very time consuming and frustrating.
Also the small fuse box on the bulkhead worth removing and doing the same.
I got the tool below which helps trace the problems down, check out the video on youtube.
http://www.amazon.co.uk/PPX-Auto-Probe-Plus-6-24V/...
Happened to me on a couple of minis, need replacing really, you can clean them but it's very time consuming and frustrating.
Also the small fuse box on the bulkhead worth removing and doing the same.
I got the tool below which helps trace the problems down, check out the video on youtube.
http://www.amazon.co.uk/PPX-Auto-Probe-Plus-6-24V/...
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


