Taimar Heater Fan Switch

[Cerberus90]

Does anyone know if the plug for the heater fan switch on a Taimar is available anywhere? Or an alternative solution?

Ours hasn't got the plug on the old loom and the pattern of the pins appears to be different to the switches on the center console, so can't use one of those, female bullet doesn't seem to fit either.

[Adrian@]

There is no plug, the centre is 12v and top and bottom feed out to 1 and 2....the connector is the Lucas multi-connector female.
Adrian@

[Cerberus90]

Adrian@ said:

Lucas multi-connector female.
Adrian@

Which looks like??


A google doesn't bring any clues up, just lots of the modern multipin connectors.

[Adrian@]

As fitted to TVR's 1969 to 2007 ish (you never know, pull the T350 apart and find some)...LIKE dad is going to let you do that Tom.
Adrian@

[Cerberus90]

Just found some leftover ones of them from the Hazard switch, so all good.

I'd be raiding the mini before the T350.

[Adrian@]

Solder them on and heat shrink cover them... part the heat shrink off about 2mm longer than the connector open end, so IF the 12V does pull off it stays safe. I use a little super glue on the heat shrink end so that 'sticks' to the switch back. I forgot about the Mini...yes that will have them too.
Adrian@

[Cerberus90]

Thanks Adrian.