944 bumper question. Any ideas please?

[silverback mike]

Does anyone know how to remove the front bumper from a 1987 vintage 944.

just the bit with the sidelights on.

Thanks in advance.

Mike.

[silverback mike]

helloooooooooooooooooooooooooooooooo

[Mustard]

ellllllllllllllllllllllllllllooooooooo




sorry couldnt resist it!

[diver944]

I don't think we're ignoring you Mike

.....we just don't know

[silverback mike]

Mustard said:

ellllllllllllllllllllllllllllooooooooo sorry couldnt resist it!

Nice one folks. Thought I was in the bad books for a bit.

[interloper]

Try this website for info. [url]www.clarks-garage.com/[/url]

[BLOW PW]

Hi Mike.

Not sure if this will help as its an extract from my Haynes manual for the 924 but should be the same, right???
1) Follow wires from indicators & unplug wires at connector.
2) If headlamp washers are fitted, pull washer hose from T-fitting at reservoir.
3) The bumper is held in place by 2 bolts, one either side of the number plate, just behind the bumperette pads. Insert proper size socket into the access holes beneath the bumper & unbolt the bumper
4) Remove the bolts, lock washers & flat washers from each side.
5) Remove the bumper.
Hope this helps, let me know, ok?

BLOW

[silverback mike]

Cheers blow, top chap.

[BLOW PW]

No prob Mike. Did Santa bring you the V8 you wanted for the engine swap?

[silverback mike]

Unfortunately not....so ended up delving into the one I have to change the belts and have a good gander inside it. It all looks pretty good, so will have to work out ways to make the little badger a bit faster.

Cheers