Ride hight TVR Cerbera 4.2 1997
Ride hight TVR Cerbera 4.2 1997
Author
Discussion

flyingdutchie

Original Poster:

862 posts

217 months

Tuesday 14th October 2014
quotequote all
Does somebody know what this ride hight should be and from where to where this has to be measured?

gruffalo

8,091 posts

249 months

Tuesday 14th October 2014
quotequote all
ground to rear out rigger 135mm
ground to front outrigger 125mm

or there about.

flyingdutchie

Original Poster:

862 posts

217 months

Tuesday 14th October 2014
quotequote all
Thanks

Ireland

3,517 posts

237 months

Tuesday 14th October 2014
quotequote all
The spec on my car (a '97 4.2) said 130mm at all corners

Byker28i

84,275 posts

240 months

Wednesday 15th October 2014
quotequote all
gruffalo said:
ground to rear out rigger 135mm
ground to front outrigger 125mm

or there about.
120mm front, 130mm rear on mine

Check clearance. Between your exhaust and road, plus the bolts on the ladder plate on the tunnel. Those are the points that normal catch

Mr Cerbera

5,148 posts

253 months

Thursday 16th October 2014
quotequote all
Just coz I like to add to the spice of life, I was told 150mm to centre of bottom of lower front and rear Chassis Cross Members.

I put larger allen bolts on my chassis brace though and am now running 120mm.

wink

(Oh, and it's a 2001, Series II 4.5)

Vee8ight

734 posts

162 months

Thursday 16th October 2014
quotequote all
According to the Data sheet for the Cerbera, the ride height should be measured at the dampers by measuring the lenghth of the damper/spring with weight on wheels. Front should measure 325mm and rear 353mm .