which glue for metal to fibreglass??
which glue for metal to fibreglass??
Author
Discussion

Chimp871

Original Poster:

837 posts

146 months

Sunday 2nd November 2014
quotequote all
whilst shutting boot possibly more firmer than I should have done the metal trim near the boot hinge (the glued in piece) came loose.

Just wondering what adhesive I should use to stock it back in?

Steffan

10,362 posts

257 months

Sunday 2nd November 2014
quotequote all
Chimp871 said:
whilst shutting boot possibly more firmer than I should have done the metal trim near the boot hinge (the glued in piece) came loose.

Just wondering what adhesive I should use to stock it back in?
Scrupulous cleanliness on the joined surfaces using Araldite sparingly has always worked for me. There may be alternatives others may suggest but various repairs to various classic fibreglass cars of this type have worked well for me. Cleanliness is essential best of luck?

Goaty Bill 2

3,592 posts

148 months

Sunday 2nd November 2014
quotequote all
Chimp871 said:
whilst shutting boot possibly more firmer than I should have done the metal trim near the boot hinge (the glued in piece) came loose.

Just wondering what adhesive I should use to stock it back in?
yikes
One of the first rules of TVR ownership; Never slam the boot lid.
Everything is screwed into wood held in place by fibreglass.
Lower it into place by hand, then apply a firm push to click home.


Steffan said:
Scrupulous cleanliness on the joined surfaces using Araldite sparingly has always worked for me. There may be alternatives others may suggest but various repairs to various classic fibreglass cars of this type have worked well for me. Cleanliness is essential best of luck?
Agreed.
The blue cap variant.
It takes longer to cure, overnight is best, but it will never let go again.

Chimp871

Original Poster:

837 posts

146 months

Sunday 2nd November 2014
quotequote all
Goaty Bill 2 said:
Chimp871 said:
whilst shutting boot possibly more firmer than I should have done the metal trim near the boot hinge (the glued in piece) came loose.

Just wondering what adhesive I should use to stock it back in?
yikes
One of the first rules of TVR ownership; Never slam the boot lid.
Everything is screwed into wood held in place by fibreglass.
Lower it into place by hand, then apply a firm push to click home.


Steffan said:
I know, I know.... My mind was elsewhere when putting shopping into boot and i accidentally pushed it down. Knew the moment I did it it was wrong. 99/100 I'll close then push down.

Goaty Bill 2

3,592 posts

148 months

Sunday 2nd November 2014
quotequote all
Chimp871 said:
I know, I know.... My mind was elsewhere when putting shopping into boot and i accidentally pushed it down. Knew the moment I did it it was wrong. 99/100 I'll close then push down.
Perfectly understood, and apologies for the lesson in that case smile


Chimp871

Original Poster:

837 posts

146 months

Sunday 2nd November 2014
quotequote all
Goaty Bill 2 said:
Perfectly understood, and apologies for the lesson in that case smile
No need to apologise you were correct to point it out.