bonnet cable on 964
Discussion
dont know but I found this reply from another forum.
Sorry this is all I could find.
"I searched for the cable once, it's located in the left front wheel arch, near the indicators. You have to remove the mud fender inside the wheel arch, and there you will find a steel cable with a loop. It goes thru the body to the bonnet lock, Should be very easy to do.
Good luck!!"
not sure how accurate this is or if it applies to RHD cars.
Good luck.
Sorry this is all I could find.
"I searched for the cable once, it's located in the left front wheel arch, near the indicators. You have to remove the mud fender inside the wheel arch, and there you will find a steel cable with a loop. It goes thru the body to the bonnet lock, Should be very easy to do.
Good luck!!"
not sure how accurate this is or if it applies to RHD cars.
Good luck.
pesty said:
dont know but I found this reply from another forum.
Sorry this is all I could find.
"I searched for the cable once, it's located in the left front wheel arch, near the indicators. You have to remove the mud fender inside the wheel arch, and there you will find a steel cable with a loop. It goes thru the body to the bonnet lock, Should be very easy to do.
Good luck!!"
not sure how accurate this is or if it applies to RHD cars.
Good luck.
in theory they should have them, but a lot don't!
normally on 964's the plastic around the actual release handle breaks & the inner cable has nothing to pull against. if this is the case then using a pair of pliers to hold the outer cable may work, but they are usually stiff.
best of luck.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff