GT3 dual mass flywheel with 4.0 clutch
Discussion
I've been reading that you cannot do this.
You can fit the 4.0 clutch to a 2010 GT3 with dual mass flywheel. Done it.
Just minor modification to the 4.0 pressure plate. The "extra" thread on the 3 screws (forward facing) needs to be removed otherwise they will touch in the bell housing and the engine will (can) not turn over.
You can fit the 4.0 clutch to a 2010 GT3 with dual mass flywheel. Done it.
Just minor modification to the 4.0 pressure plate. The "extra" thread on the 3 screws (forward facing) needs to be removed otherwise they will touch in the bell housing and the engine will (can) not turn over.
Gassing Station | 911/Carrera GT | Top of Page | What's New | My Stuff