Harness mounting

[Joshsl]

I'm trying to find a suitable way to attach my harness in my track car. The harness's I have have these connections on the two of the straps
<a href="http://s457.photobucket.com/user/joshsl2009/media/E5914CD7-AE77-4EC9-9CC0-9E9C43017869.jpg.html" target="_blank"><img src="http://i457.photobucket.com/albums/qq291/joshsl2009/E5914CD7-AE77-4EC9-9CC0-9E9C43017869.jpg" border="0" alt=" photo E5914CD7-AE77-4EC9-9CC0-9E9C43017869.jpg"/></a>


What do need to mount this to the car safety. Only place I have found so far is the rail that the original seatbelt slid along and then on the other side I have put a bolt through the clip and bolted it to the seat subframe. Can I change the fixing brackets on the harness's or buy something that is made to work with those clips

It's going into a 106 incase that helps

[skibum]

Those clips need to go through seat belt eyebolts - http://www.driftworks.com/harness-eyebolt.html?gcl...

They need to be mounted into the car - you can drill through, put plates behind, etc.. Also remember that the angle of the belts need to be correct They need to be between 45 degrees and horizontal - hence why most people put the eyebolts at the back of the car or mount harness bars across rear suspension mounts.

[Benbay001]

I enjoyed looking through the rest of your photobucket photos.

[campionissimo]

me too - i'd tap the gf.

[Joshsl]

not the girlfriend, just a former concquest