Name That Idle Control Valve

[m4tti]

Any one recognise this idle control valve and what vehicle it was originally fitted to?

[stevesingo]

http://www.tdi-plc.com/toda-racing-iscvvacuum-tank...

[m4tti]

stevesingo said:

http://www.tdi-plc.com/toda-racing-iscvvacuum-tank...

Yep am aware its a toda part, but would like to know what vehicle that valve originally came from. I dont believe its a Honda original.

[Sensibleboy]

Are those cable ties on that tube?

[m4tti]

Would appear so. They've used a piece of silicon hose to connect the vaccum cylinder to the valve.

[DVandrews]

Looks like it is for TBs, convention IACVs just bypass the throttle body as all cylinders are fed from the plenum. With TBs individual plumbing is required for each runner. So it is unlikely to be a production part nor for a stock type production engine. IMO of course.

Dave

[stevesingo]

http://toplowridersites.com/auto-new-control-idle-...

[PhillipM]

DVandrews said:

Looks like it is for TBs, convention IACVs just bypass the throttle body as all cylinders are fed from the plenum. With TBs individual plumbing is required for each runner. So it is unlikely to be a production part nor for a stock type production engine. IMO of course.

Dave

Depends if he wants the assembly or just the valve. If the latter, it's probably from a production car...

[DVandrews]

If it's just the valve then there is plenty of choice...

Dave

[m4tti]

PhillipM said:

Depends if he wants the assembly or just the valve. If the latter, it's probably from a production car...

Correct. Not interested in the vacuum tank, just want to identify the vehicle that valve came from.

I'll be making my own tank as I have six rather than four throttle bodies.

[m4tti]

DVandrews said:

Looks like it is for TBs, convention IACVs just bypass the throttle body as all cylinders are fed from the plenum. With TBs individual plumbing is required for each runner. So it is unlikely to be a production part nor for a stock type production engine. IMO of course.

Dave

Pretty confident that valve is from a production car. The cost of production-isation of a bespoke valve would be fairly significant at low volumes.