HELP I CAN'T IDENTIFY MY ENGINE!
HELP I CAN'T IDENTIFY MY ENGINE!
Author
Discussion

sarairving1

Original Poster:

20 posts

200 months

Tuesday 7th April 2015
quotequote all
I have bought an F3 1949 Pickup to restore
I had what I thought was a Mustang engine but
The casting marks on the block don't look like
anything I can find on Fords or Chevys!
It has:

W
AK27

Any help appreciated
Sara
Sorry the picture is upside down!



Edited by sarairving1 on Wednesday 8th April 10:38

Cledus Snow

2,147 posts

219 months

Tuesday 7th April 2015
quotequote all
How about a pic of the engine? Easier to make a start from there.

ZOLLAR

19,920 posts

204 months

Tuesday 7th April 2015
quotequote all
No idea but try this site, may get a stronger response.

http://www.ford-trucks.com/forums/890173-restoring...

DanGPR

991 posts

202 months

Tuesday 7th April 2015
quotequote all
Straight 6? V8? V6?

gazza285

11,263 posts

239 months

Tuesday 7th April 2015
quotequote all
Is there a full engine number on the other side of the block, by the exhaust manifold?

sarairving1

Original Poster:

20 posts

200 months

Tuesday 7th April 2015
quotequote all
Thank you Zollar the website will only let me in so far and then thinks
I'm spam!
I have added some pictures that aren't brilliant!
There are no other marks I can see


sarairving1

Original Poster:

20 posts

200 months

Tuesday 7th April 2015
quotequote all

sarairving1

Original Poster:

20 posts

200 months

Tuesday 7th April 2015
quotequote all
gazza285 said:
Is there a full engine number on the other side of the block, by the exhaust manifold?
Hi, there are no other marks! I've looked on various American car websites but nothing looks like these mark!
I was led to believe it was a Mustang 6ltr but just don't know!

V88Dicky

7,373 posts

214 months

Tuesday 7th April 2015
quotequote all
Looks like a Cleveland or Windsor 351, but I could be wrong.

Don't suppose there's any sign of the original paint on the block? Blue could be Ford or Pontiac, orange Chevy.

Strawman

6,463 posts

238 months

Tuesday 7th April 2015
quotequote all
Good choice of ride, can't help with the engine


V88Dicky

7,373 posts

214 months

Tuesday 7th April 2015
quotequote all
The front mounted dizzy is swaying me towards a Ford lump.

I'd love to know when you find out biggrin

t4thomas

394 posts

197 months

Tuesday 7th April 2015
quotequote all
I think that's a Chevy W-series engine.

V8forweekends

2,506 posts

155 months

Tuesday 7th April 2015
quotequote all
t4thomas said:
I think that's a Chevy W-series engine.
Not unless it's in the wrong way round - as above, the dizzy is at the front.

OP - where on the engine is the number you pictured?

Ford engines should have a casting number near the back of the engine, above the starter.

V8forweekends

2,506 posts

155 months

Tuesday 7th April 2015
quotequote all
sarairving1 said:
I have bought an F3 1949 Pickup to restore
I had what I thought was a Mustang engine but
The casting marks on the block don't look like
anything I can find on Fords or Chevys!
It has:

W
AK27
K27 looks like a date code - but it would mean the "A" needs to be a number - eg 8K27 engine made on 27th November October 1968

Edited by V8forweekends on Tuesday 7th April 21:14

marmitemania

1,571 posts

173 months

Tuesday 7th April 2015
quotequote all
Its a Windsor V8. Look up Ford K code engine in Google image and you will see it best picture is 3rd from left top row.

eldar

25,366 posts

227 months

Tuesday 7th April 2015
quotequote all
marmitemania said:
Its a Windsor V8. Look up Ford K code engine in Google image and you will see it best picture is 3rd from left top row.
Is the top hose right for a Windsor? Normally off the inlet manifold, rather than the block as in Cleveland?

marmitemania

1,571 posts

173 months

Tuesday 7th April 2015
quotequote all
I don't know. That's the engine that looked closest to me. But I'm now having my doubts because if you look at the closely at a good picture of a Windsor engine the bolts holding the inlet manifold on go down in a vertical plane where as the mystery engine the bolts seem to go in on an angled plane. The similarity's I looked at where the dizzy positioning the little blank or hose feed to the left of the dizzy on the inlet manifold the top hose position which granted is not identical on all the pics but the angle (not the position) can be changed with a different elbow the rocker cover bolt positions (chevy and other makes do not have bolts on the end.

V8forweekends

2,506 posts

155 months

Tuesday 7th April 2015
quotequote all
If it is 6 litre that's ~ 360 so it could be a 360/361 FE

ETA according t'interwebs only the FE has the dizzy going through the inlet manifold - which the pictured one does appear to do.

Edited by V8forweekends on Tuesday 7th April 22:26


Edited by V8forweekends on Tuesday 7th April 22:32

legless

2,064 posts

171 months

Tuesday 7th April 2015
quotequote all
Yup. FE V8 seems the most likely candidate.

eldar

25,366 posts

227 months

Tuesday 7th April 2015
quotequote all
marmitemania said:
I don't know. That's the engine that looked closest to me. But I'm now having my doubts because if you look at the closely at a good picture of a Windsor engine the bolts holding the inlet manifold on go down in a vertical plane where as the mystery engine the bolts seem to go in on an angled plane. The similarity's I looked at where the dizzy positioning the little blank or hose feed to the left of the dizzy on the inlet manifold the top hose position which granted is not identical on all the pics but the angle (not the position) can be changed with a different elbow the rocker cover bolt positions (chevy and other makes do not have bolts on the end.
Ford engine, I'm sure. And about 80% confident its Cleveland, the top hose location and narrower rocker covers. Firing order seems to indicate which is which...